Smeg DF41-7 instruction manual 105

User instructions

After using the table to identify the most appropriate washing program:

•press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

•keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

•close the door; after about 2" the program will start. While it is in progress, the relative LIGHT will flash (indicating that the program is being executed).

PROGRAMME,

NUMBER & SYMBOL

1	SOAK
2	LIGHT
3	ECO (*)
	EN 50242

4AUTO 60-70

5INTENSIV

LOAD CROCKERY	PROGRAM	DURATION	CONSUMPTION
AND CUTLERY	PROGRESS	MINUTES	WATER	POWER
		(2)	LITRES (1)	KWh (2)
Pans and dishes	Cold prewash	9'	5	0,02
awaiting
a further wash
Delicate dishes with	Wash at 45°C
	Cold rinse	59'	12	0,90
light dirt.	Rinse at 70°C
	Dry
Wash immediately	Wash at 50°C
	Cold rinse	175'	**	**
after use for dishes
	Rinse at 66°C
with normal dirt
	Dry
	Cold prewash
Pans and dishes	Wash at 55°C
with normal dirt,	Wash at 65°C	***	***	***
even with dried-on	Cold rinse
residues.	Rinse at 70°C
	Dry
	Prewash at 45°C
Very dirty pans and	Wash at 70°C	105'	20	1,50
dishes (except	2 cold rinses
delicate items)	Rinse at 70°C
	Dry

Only run the soak program with half loads.

The “3/1” OPTION (6) and DELAYED START (8) options cannot be used with the soak program.

(*)Reference program as per EN 50242 standard.

(**)See energy label.

(1)Average power consumption with the softener set on level 2.

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

10