Smeg CW400RSD, CW400BSD, CW350SD, CW350BSD manual First Startup, Preparation for USE, Settings

Page 6

back of the machine.

‐The protection conductor (PE) is yellow-green in color, the neutral conductor (N) is blue and the phase conductors (L1, L2, L3) are black, gray and brown.

5 FIRST STARTUP

FIRST STARTUP

The electrical protection system must be subjected to a functional test before use. The installation must be performed and/or verified by the authorized reseller who will be responsible for the first startup and the instructions relative to the dishwasher’s operation.

PREPARATION FOR USE

Important:

The rinse-aid metering unit comes equipped in all models while the detergent metering unit comes equipped in only some models.

If both metering units are present position the external detergent and rinse-aid containers and insert their respective suction tubes located at the back of the machine. Red tube: detergent

Transparent tube: rinse-aid

Before inserting the tubes in the containers apply the weight (necessary to keep the tube at the bottom of the container) and the filter as indicated in the diagram.

For adjustments, use the adjustment screws indicated in the diagram. It is recommended that adjustments be performed by personnel from the companies who have supplied the detergent products.

If the detergent metering unit did not come pre-installed it can be installed at a later time by ordering the relative KIT.

Alternatively, an external metering unit can be connected by means of an electrical connection with a 2x0.5 mm type H05 RN-F cable. This cable must be inserted through the passage indicated in the TECHNICAL CHARACTERISTICS scheme and connected in accordance with the electrical scheme furnished with the dishwasher.

The metering unit must be of 230V/50Hz with a maximum absorbed power of 15W. Connect the detergent metering unit to the dishwasher through the red tube cited above.

6SETTINGS (only models CW400RSD - CW400R – CWC500R)

SETTINGS

During the first startup, arrange for the setup or the adjustment of the functions/parameters indicated hereafter:

POWER SUPPLY: 200 – 250 VAC.

ABSORBED POWER : 4 VA

OPERATIONAL TEMPERATURE: 0 / 60 °C

OPERATIONAL HUMIDITY: max 90 % without condensation

NORMS: The control unit is designed and manufactured in observance of the

European norms in vigor regarding electrical safety and electromagnetic compatibility.

Particularly the following:

EN 61000-6-3 : Emissions for residential and commercial environments

EN 61000-6-2 : Immunity for industrial environments

EN 61000-4-11 : Immunity to supply micro-interruptions

EN 60335-1 : Low voltage safety directive

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CW350B CW350BS CW350BSD CW400B CW400BS CW400BSD CW400R CW400RS CW400RSDTechnical Instructions User InstructionsSafety and usage instructions PersonnelInstallation and Positioning CW400BS CW400RS CW350BSD CW350SD CW400BSD CW400RSDElectrical connection Installer Technical Assistant InstructionsPositioning Water and drain connectionFirst Startup SettingsAbsorbed Power 4 VA Operational Temperature 0 / 60 C First StartupConnection Scheme Main Functions with Machine Powered Keyboard Fucntionality CW400RSD CW400RDisplay YES/NOYES Parameter Function with Machine on Regeneration mode Screen Displayed AnomaliesUser Instructions for Models CW400R CW400RSD Before washingSilverware Loading GlassesFirst Daily USE Tank and boiler empty Mod. CW400RSD CW400R Visualization What to do and what happensProgram Selection Resin Cycle for models equipped with water-softenersProgram Duration Total drainage at the end of the day User Instructions for Models Before washingLoading Glasses Total drainage at the end of the day models Equipped with drain pumpTotal drainage at the end of the day models not Cleaning of the filter during the day Maintenance and CleaningDaily cleaning Regeneration cycle for models equipped with water softenersPeriodic checks Prolonged disuseProblems and Anomalies User Problem Possible Cause Possible RemedyScreen Displayed Anomalies User Mod. CW400RSD Mod. CW400R STB ISPSTV TRBSchema elettrico legenda Electrical scheme legend Mod. CW350B Mod. CW350BS-CW350BSD Mod. CW350 Mod. CW350S CW350SD Mod. CW400B Mod. CW400BS CW400BSD Mod CW400R Mod CW400RS CW400RSD

CW350BSD, CW350B, CW350BS, CW400B, CW350S specifications

The Smeg CW400RSD, CW400RS, CW400BSD, CW400R, and CW400BS are part of Smeg’s innovative range of built-in coffee machines that seamlessly combine aesthetics, performance, and advanced coffee brewing technology. Smeg, an Italian brand known for its retro-inspired design, has ensured that these machines not only perform exceptionally but also add a touch of elegance to any kitchen.

One of the standout features of these models is their intuitive touch control interface, which provides a user-friendly experience. The LED display offers clear visibility of the settings, making it easy to choose from the numerous coffee beverages available, including espresso, cappuccino, and latte macchiato. Users can customize their drinks by adjusting the strength and volume, catering to personal taste preferences.

These coffee machines are equipped with a powerful coffee grinder, allowing for fresh bean grinding, which is crucial for achieving rich and aromatic coffee. The adjustable grind settings enable users to choose their desired coarseness, ensuring optimal extraction and flavor. Additionally, the machines come with a convenient bypass doser, allowing for the use of pre-ground coffee when needed.

Another notable characteristic is the milk frothing system. The CW400 series integrates a unique milk frother that allows users to create creamy textures for their milk-based drinks. This feature is essential for achieving the perfect cappuccino or flat white, emphasizing Smeg's commitment to delivering café-quality beverages at home.

The design of the CW400 series cannot be overlooked. With options featuring vibrant colors and a sleek, modern design, these machines not only serve as coffee makers but also as style statements in the kitchen. Their compact dimensions make them ideal for various kitchen layouts, fitting seamlessly into any space.

In terms of maintenance, Smeg has incorporated user-friendly cleaning systems, including automatic cleaning cycles and removable components for easy washing. The machines also have a water reservoir that can be easily accessed and refilled, ensuring hassle-free usage.

Overall, the Smeg CW400RSD, CW400RS, CW400BSD, CW400R, and CW400BS offer a blend of modern technology and classic design, making them a perfect addition for coffee aficionados and casual drinkers alike. Their advanced features, customizable options, and elegant aesthetic elevate the coffee-making experience, making every cup a delight.
Top Page Image Contents