Smeg CE92IMX Safety Precautions, Intended USE, Never Attempt to Repair the Appliance Yourself

Page 4

Safety precautions

3. SAFETY PRECAUTIONS

IN CONFORMITY WITH THE PROVISIONS REGARDING ELECTROMAGNETIC COMPATIBILITY, THE ELECTROMAGNETIC INDUCTION COOKING HOB COMES UNDER GROUP 2 AND CLASS B (EN 55011)

THE PLUG TO BE CONNECTED TO THE POWER SUPPLY LEAD AND THE RELATIVE SOCKET MUST BE OF THE SAME TYPE AND COMPLY WITH THE REGULATIONS IN FORCE.

THE SOCKET MUST BE ACCESSIBLE AFTER THE APPLIANCE IS BUILT IN.

NEVER DISCONNECT THE PLUG BY PULLING ON THE CABLE.

THIS APPLIANCE MUST NEVER BE INSTALLED ON A STAND.

IT IS OBLIGATORY FOR ALL ELECTRICAL SYSTEMS TO BE GROUNDED ACCORDING TO THE METHODS REQUIRED BY SAFETY RULES.

IMMEDIATELY AFTER INSTALLATION, CARRY OUT A QUICK TEST ON THE APPLIANCE FOLLOWING THE INSTRUCTIONS PROVIDED LATER IN THIS MANUAL. SHOULD THE APPLIANCE NOT FUNCTION, DISCONNECT IT FROM THE POWER SUPPLY AND CALL THE NEAREST TECHNICAL ASSISTANCE CENTRE.

NEVER ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.

AS SOON AS YOU NOTICE A FRACTURE OR A CRACK ON THE SURFACE OF THE GLASS HOB, SWITCH THE APPLIANCE OFF AND CONTACT AN AUTHORISED TECHNICAL ASSISTANCE CENTRE.

PEOPLE WHO HAVE PACEMAKERS OR OTHER SIMILAR DEVICES FITTED MUST MAKE SURE THAT THE FUNCTIONING OF THESE DEVICES IS NOT JEOPARDISED BY THE INDUCTIVE FIELD, WHOSE FREQUENCY RANGE IS BETWEEN 20 AND 50 KHZ.

NEVER PLACE FLAMMABLE OBJECTS IN THE OVEN: IF IT SHOULD ACCIDENTALLY BE SWITCHED ON, THIS MIGHT CAUSE A FIRE.

DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NEVER TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN.

THE USE OF THIS APPLIANCE IS NOT PERMITTED TO PEOPLE (INCLUDING CHILDREN) OF REDUCED PHYSICAL AND MENTAL ABILITY, OR LACKING IN EXPERIENCE IN THE USE OF ELECTRICAL APPLIANCES, UNLESS THEY ARE SUPERVISED OR INSTRUCTED BY ADULTS OR PEOPLE RESPONSIBLE FOR THEIR SAFETY.

ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE 0 (OFF) POSITION WHEN YOU FINISH USING THE OVEN.

BEFORE THE APPLIANCE IS PUT INTO OPERATION, ALL THE LABELS AND PROTECTIVE FILMS APPLIED INSIDE OR OUTSIDE MUST BE REMOVED.

4. INTENDED USE

THE APPLIANCE IS BUILT TO PERFORM THE FOLLOWING FUNCTION: COOKING AND REHEATING OF FOOD; ALL OTHER USES ARE CONSIDERED IMPROPER.

The manufacturer declines all responsibility for damage to persons or things caused by failure to comply with the above regulations or deriving from tampering with even just one part of the appliance and the use of non-original spare parts.

34

Image 4
Contents Index Precautions for USE Plate Must Never be RemovedRecycling Instructions OUR Environment Policy Intended USE Safety PrecautionsNever Attempt to Repair the Appliance Yourself Getting to Know Your Cooker General DescriptionAvailable Accessories Before InstallationAccessories available on request Instructions for the User Description of the Controls on the Front Panel Main Oven Temperature Selection Knob PT1 Auxiliary Oven Functions / Temperature Selection KnobMain Oven Functions Selection Knob PT2 Cooking HOB Control KnobUsing the Main Oven Setting the current timeFirst use Selecting a functionProgrammed cooking procedures 10.4.1Semiautomatic cookingModifying the data set 10.4.2Automatic cookingModifying the data set during cooking Cooking with selection of a recipeAutomatic cooking with selection of a recipe Making permanent changes to a recipe Table of predefined recipes Secondary menu Using the Auxiliary Oven Cooking in the Oven Description of the selected functionsHints on Using the Accessories Cooking Hints and TipsCooking tables Using the Cooking HOB Cooking zonesZone number Zone Diameter Power consumed 145 mm Total power consumed180 mm 260 mm13.5.1Cookware detector signal Operation Activating temperature13.5.2Residual heat 13.5.3Cooking hob lock-out13.5.5Thermal protection glass-ceramic hob 13.5.6Keep Warm FunctionCleaning and Maintenance Extraordinary Maintenance Changing the light bulbRemoving the door Removing the door sealWhat to do if Oven display is completely offOven does not heat up Controls do not respondInstalling the Appliance Electrical connectionPositioning and levelling the appliance depending on model