Smeg S20XMF-7, S20XMF.1, S20XMF-5 manual Removing, Oven door seal

Page 22

Instructions for the user

8.2 Removing

Hold the door on both sides with both hands near hinges A and raise levers B. Lift up the door forming an angle of about 45° and remove. To refit, slide the hinges A in the grooves, drop the door and release levers B.

8.3 Oven door seal

To permit thorough cleaning of the oven, the seal may be removed. Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs at the corners as shown in the figure.

After cleaning, refit the seal with the longer side horizontal and insert the tabs into the appropriate holes starting from the top ones.

46

Image 22 Contents
Contents Introduction Instructions for Safe and Proper USEIntroduction Electrical connection Instructions for the installerInstallation This label must never be removedMounting the oven Description of Controls Function Switch KnobInstructions for the user Front control panelThermostat Knob List of Functions Clock adjustmentElectronic programmer Semiautomatic cookingAutomatic cooking Adjusting alarm volumeEnd of cooking Minute-counter Switching off the alarmCancellation of set data Changing the set dataCooling system USE of the OvenOven light Available Accessories Some models do not feature all accessoriesTraditional cooking multifunction models Function Switch Thermostat SwitchCooking Hints Hot-air cooking multifunction models225 Grill cookingHot-air grilling multifunction models 200Function Switch Thermostat Switch in Position Defrosting multifunction modelsSpit roasting models with static oven 200Traditional Cooking Recommended cooking table HOT-AIR Cooking Ordinary Daily Cleaning Cleaning and MaintenanceCleaning stainless steel Food stains or residuesCleaning of the oven Door glassExtraordinary Maintenance Replacement of light bulbRemoving Oven door seal