Instructions for the user
3.2.1 Setting the time
When the oven is used for the first time, or after a power blackout, the
display flashes on and off at regular intervals. Press the 
key for 1/2 seconds to stop the display flashing and start setting of the current time.
Press the value modification keys 
or 
to increase or decrease by one minute for each time a key is pressed.
Press one of the two value modification keys until the current time appears. The clock will start from the time set 6/7 seconds after the last key is pressed.
At the end of each programmed cooking operation, the clock gives 8 beeps, repeated 3/4 times at intervals of about 1 and a half minutes. The beeps can be stopped at any moment by pressing any key.
3.2.2 Minute-minder
This function does not stop cooking but just triggers the beeps.
-When the 
key is pressed the display illuminates, appearing as shown in figure 1;
-Press the 
or 
keys within 6/7 seconds to set the
-The countdown will start 6/7 seconds after the last key is pressed; at the end of it, you will hear the beeps.
-During cooking with countdown, the current
time can be displayed by pressing the 
key once; press again to return to the minute- minder display.
1
2
-At the end of the countdown, the oven has to be switched off by hand, by turning the thermostat and the function selector to 0.
11