Smeg FP132X, FP133X manual Programming, Demo Function

Page 11

Instructions for the User

8.3 Programming

Cooking duration: the cooking duration can be set. Before it can be set, the thermostat must be turned to the cooking temperature required and the function selector knob to any setting. To set the cooking duration, proceed as follows:

-

Press the

key key and the display will light up as shown in figure 1.

-

Keep the

key pressed and at the same time use

or

keys to set the minute

 

minder. Each time a key is pressed, 1 outside segment, representing 1 minute of

 

cooking time, will light up or go out. Keep both value modification keys pressed to

 

change the numbers displayed more quickly.

 

1)

-The maximum programmed cooking duration is 11 hours and 59 minutes.

-

After one complete revolution, the numbers will start to flash in sequence,

 

 

indicating that the time has exceeded 60 minutes. For example, figure 2 shows a

 

 

cooking duration of 2 hours and 40 minutes.

 

-

A few seconds after the last key is pressed, the programmed cooking operation

 

 

will start; when it finishes, the buzzer will sound.

2)

-At the end of the cooking time the timer will switch the oven heating elements off, the beeps will start to sound and the numbers on the display will flash.

-At the end of the time set, 10 beeps will sound in sequence; they are repeated 3 times at one minute intervals. This sequence can be stopped at any time by pressing or .

-The key can be pressed while the buzzer is active to vary the volume.

-The duration can also be reset by resetting the program selected: pressing the central key for a few seconds will delete the duration set and the oven will have to be switched off in manual mode.

At the end of programmed cooking, manual operation of the oven has to be restored by holding down the key for a few seconds.

Starting cooking: as well as setting a cooking duration, the cooking start time can also be set (with a maximum delay of 12 hours from the current time). To set the cooking start/end time, proceed as follows:

-Set the cooking duration as described in the previous point.

-Press the key again and hold it down. The current time appears on the display: use the and keys to set the cooking start time.

-A few seconds after the last key is pressed, the cooking start time will appear on the display.

-At the start of a programmed cooking operation, the dot between 12 and 1 will also illuminate, indicating that this is a programmed cooking procedure.

-To view the current time at any moment, press the key. After a few seconds, the cooking start time will return to the display.

-At the end of the cooking time the timer will switch the oven heating elements off, the beeps will start to sound and the numbers on the dial will flash.

-To reset the whole program set, keep the central key pressed for a few seconds: if cooking has

already started, the oven will have to be switched off by hand.

At the end of programmed cooking, manual operation of the oven has to be restored by holding down the key for a few seconds. Caution: for the oven to start cooking operations after the programming procedures just described, the thermostat and function selector knob must be correctly set on the temperature and function required.

8.4 "DEMO" Function

Models with analogue/digital programmer feature a "DEMO" function which deactivates the heating elements while leaving the other functions unchanged. To activate it, simply press the , , and keys for a few seconds. A confirmation beep will inform the user that the function is active.

Once the display shows the current time with the demo function activated, the number 6 will flash. To deactivate it, simply repeat the same procedure.

40

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Table of Contents Nameplate Must Never be Removed Precautions for USEDisposal Instructions OUR Environment Policy Safety Precautions GET to Know Your Oven Before InstallationDescription of Front Panel Controls Not ALL Functions are Provided on Some Models Automatic cooking Setting the timeElectronic Programmer on Some Models only Semiautomatic cookingStopping the buzzer TimerAdjusting the buzzer volume End of cookingMinute-minder Electronic Analogue Clock on Some Models onlyDemo Function ProgrammingClock and Programmer on Some Models only Inside light Using the OvenPrecautions and General Advice Cooling fan system all modelsAccessories Available Delicate cooking Cooking AdviceConventional cooking Hot air cookingThawing GrillingHot air grilling Spit roasting Function Switch Thermostat MaximumConventional Cooking HOT AIR Cooking Cleaning and Maintenance Before starting the automatic cleaning cycle Pyrolysis automatic oven cleaningSetting the cleaning cycle with programmer+clock Setting the cleaning cycle with electronic programmerFunction Selector Knob Cleaning Cycle Duration Setting the cleaning cycle with electronic analogue clockRemoving the door Extraordinary MaintenanceRemoving doors with pins Changing the light bulbRemoving the door glazing Nameplate must never be removed Installing the ApplianceElectrical connection Positioning the oven

FP132X, FP133X specifications

The Smeg FP133X and FP132X are two standout models in the premium kitchen appliance segment, renowned for their sophisticated design and advanced functionalities. Smeg, an Italian brand famous for its retro-style aesthetics, combines culinary expertise with modern technology, creating appliances that are as effective as they are attractive.

Starting with their physical characteristics, both models boast a sleek stainless steel body that adds elegance to any kitchen. The FP133X comes with a generous capacity, allowing users to prepare large meals while the FP132X is designed to be slightly more compact, catering to those who might have space constraints without compromising on functionality. The exterior not only looks good but is also designed to be durable and easy to clean.

In terms of technology, the Smeg FP133X and FP132X are equipped with powerful motors and advanced blending systems. They feature multiple speed settings and pulse functions, which allow complete control over food processing, whether you need to chop vegetables or whip cream. The blades are crafted from high-quality stainless steel, ensuring longevity and efficient operation.

Both models come with a variety of attachments for different cooking tasks. Users can expect to find a range of accessories, including a shredding disk for grating cheese and vegetables, a slicing disk, and a dough blade for preparing bread and pastry. This versatility is a significant selling point, making these machines suitable for various recipes and culinary techniques.

Energy efficiency is another key characteristic of the Smeg FP133X and FP132X. These models are designed with energy-saving features, which not only reduce electricity consumption but also make them environmentally friendly choices for modern kitchens. Additionally, Smeg prioritizes safety, incorporating features such as a safety lock that prevents the appliance from operating unless the lid is securely in place.

User-friendly operation is ensured through intuitive controls and clear indicators. The wide feed chute minimizes preparation time by allowing larger pieces of food to be processed without the need for pre-cutting.

In conclusion, the Smeg FP133X and FP132X are not only aesthetic delights but also powerful, versatile kitchen appliances that embody efficiency, innovation, and style. Whether for the ambitious home cook or the casual chef, these food processors promise to elevate culinary experiences with their robust features and elegant design.
Top Page Image Contents