Instructions for the user
5.ELECTRONIC ANALOGUE CLOCK (ONLY ON SOME MODELS)
The programmer user instructions are valid only for the large oven.
LIST OF FUNCTIONS
AUTOMATIC LENGTH /
TIME SETTING AND RESET
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
5.1Setting the time
When the oven is used for the first time, or after a power blackout, the display flashes on and off at
regular intervals. Press the 
key for 1/2 seconds to stop the display flashing and start setting of the
current time. Press the value modification keys 
or 
to increase or decrease by one minute for each time a key is pressed.
Press one of the two value modification keys until the current time appears. The clock will start from the time set 6/7 seconds after the last key is pressed.
At the end of each programmed cooking operation, the clock gives 8 beeps, repeated 3/4 times at intervals of about 1 and a half minutes. The beeps can be stopped at any moment by pressing any key.
5.2Minute-minder
This function does not stop cooking but just triggers the beeps.
-When the 
key is pressed the display illuminates, appearing as shown in figure 1;
-Press the 
or 
keys within 6/7 seconds to set the
-The countdown will start 6/7 seconds after the last key is pressed; at the end of it, you will hear the beeps.
-During cooking with countdown, the current time can be displayed by pressing
the 
key once; press again to return to the
-At the end of the countdown, the oven has to be switched off by hand, by turning the thermostat and the function selector to 0.
1
2
7