Smeg SDO10 manual End of cooking, Adjusting alarm volume, Switching off the alarm, Minute Counter

Instructions for the user

6.4End of cooking

When cooking is over, the oven will automatically switch off and, at the same time, an intermittent alarm will sound. After switching off the alarm, the display will once again show the right time together

with the symbol , indicating that the oven has returned to manual operation mode.

6.5Adjusting alarm volume

The acoustic alarm has three different settings. These can be operated, while the alarm is sounding, by pressing key .

6.6Switching off the alarm

The alarm switches off automatically after seven minutes. They can be manually de-activated by pressing the keys and together.

6.7Minute Counter

The programmer can also be used as a simple minute counter. By pressing key , the display

shows ; keep the key pressed and at the same time press keys o . On releasing the key , programmed counting will begin and the display will show the current time and the symbol .

After set-up, to see the remaining time, press the key .

Use as a minute counter does not interrupt functioning of the oven at the end of the programmed time.

6.8Cancellation of set data

Once the programme has been set, keep the key of the function to be cancelled pressed, while at the

same time is reached by means of variation keys o . Time cancellation will be considered as end-of-cooking time by the programmer.

6.9Changing the set data

The cooking data entered can be changed at any time by keeping the function key pressed and at the same time adjusting the keys o .

10