Smeg SC081MFX, SC041MFX, SC061MFX manual Removing the door, Removing the self-cleaning panels

Instructions for the user

12.5.3 Removing the self-cleaning panels

Remove all accessories from inside the oven and proceed as follows:

1Remove the side grids (fig.1);

2Slide out the side panels “F” and “G” (fig. 2);

3Extract the rear panel “A” after first unscrewing the threaded ring “C” (fig. 2);

4Reassemble the panels by returning them to their original conditions.

1) 2)

12.6 Removing the door

12.6.1 Removing the door with mobile hinges

With the door completely open, lift the levers A until they touch the hinges B and take hold of the two sides of the door with both hands close to the hinges. Raise the door to an angle of about 45° and remove it. If the hinges have not locked, repeat the operation, raising the levers A and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, ensuring that it remains fitted into the grooves C, and lower the levers A.

26