Instructions for the User
14. EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
Before performing any operations requiring access to powered parts, switch off the power supply to the appliance.
14.1 Changing the light bulb
Remove the protective cover A by unscrewing it counterclockwise; replace the bulb B with another of the same type (25 W).
Use only oven bulbs (T 300°C).
14.2 Removing the door
Open the door completely, raise the lever B and take hold of the two sides with both hands near the hinges A. Lift the door up forming an angle of approximately 45° and remove it. To reassemble, fit the hinges A into their grooves, then lower the door into place and release the levers B.
14.3 Removing the door seal
To permit thorough cleaning of the oven, the seal may be removed.
Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs at the corners as shown in the figure.
47