Whynter BR-125SD instruction manual

Page 4

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

Use two or more people to move and install the appliance. Failure to do so can result in injury.

To ensure proper ventilation for your appliance, the front of the appliance must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This appliance must be installed in an area protected from the element, such as wind, rain, water spray or drips.

The appliance should not be located next to ovens, grills or other sources of high heat.

The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes.

The fuse (or circuit breaker) size should be 15 amperes.

It is important for the appliance to be leveled in order to work properly. For a stable installation, make sure the appliance is placed on a flat, level and solid surface.

Ensure that the surface on which the appliance is placed is strong enough to hold the appliance and the items stored inside.

This appliance is not intended for use by young children or physically-challenged persons without supervision/assistance. Young children must be supervised to ensure safety around this or any appliance.

Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or discolor the interior.

Keep fingers out of the “pinch point” areas. Clearance between the doors and between the doors and cabinet are necessarily small. Be carefully closing doors when children are in the area.

The temperature range for this refrigerator is optimized for wine and beverage storage. Perishable food items may require a different storage environment.

Do not place hot food or beverages into the appliance.

Close the cooler door immediately after putting in any items to keep the internal temperature relatively constant.

Avoid placing any objects on top of the appliance.

The appliance is an electrical appliance. To avoid injury from electrical shock do not operate the Appliance with wet hands, while standing on a wet surface or while standing in water. Do not use outdoors or in wet conditions.

When positioning or moving the appliance ensure that it is not turned up side down or greater than 45° or more off level.

Never pull the cord to disconnect it from the outlet. Grasp the plug and pull it from the outlet.

Never lift, carry or drag the appliance by the power cord.

This appliance is designed for household, non-commercial use only. Any other use will void the warranty.

Do not plug into the power outlet before set up is completed.

Do not move this appliance without emptying it and securing the door in a closed position.

4

Image 4
Contents MODEL# BR-125SD Table of Contents Appliance Safety Important SafeguidesPage Parts & Features Important Safety Instructions Installation InstructionsBefore Using Your Appliance Installation of Your ApplianceElectrical Connection Installing Stainless Steel HandleExtension Cord Operating Your Appliance Setting the TemperatureInterior Light Care and Maintenance Troubleshooting Guide Problem Possible Cause SolutionsONE Year Limited Warranty

BR-125SD specifications

The Whynter BR-125SD stands out as a versatile and innovative solution in the world of portable refrigeration. Designed primarily for those who require a refrigerator/freezer that can efficiently manage temperature settings, this model shines with its advanced features and technologies.

One of the most impressive aspects of the Whynter BR-125SD is its dual temperature zones. Users can set the temperature between 0°F to 50°F, allowing for versatile storage options. The upper section functions as a refrigerator, while the lower section can be used as a freezer. This dual functionality makes it ideal for camping trips, road trips, or even as an extra fridge for tailgating events.

The BR-125SD boasts a powerful compressor cooling system, ensuring that your food and beverages stay at the desired temperature consistently. The unit can cool down rapidly, making it an efficient and reliable option for keeping perishables fresh over extended periods. Furthermore, the adjustable temperature control equipped with both digital LED display and an easy-to-use interface allows for precise temperature management.

Portability is another key feature of the Whynter BR-125SD. With a lightweight design and built-in handles, it can be transported effortlessly to various locations. Whether you're going on a camping adventure, picnic, or simply need extra storage at home, this refrigerator/freezer combo is crafted for convenience.

Additionally, this model is designed with energy efficiency in mind. It incorporates an eco-friendly refrigerant, ensuring a minimal environmental impact while still delivering powerful performance. The unit operates quietly, which is a significant consideration for users who need a discreet appliance.

Durability is another hallmark of the Whynter BR-125SD. Constructed with robust materials, it can withstand the rigors of outdoor use without compromising performance. The lid is designed to seal tightly, minimizing cold air loss and ultimately contributing to energy savings.

In summary, the Whynter BR-125SD unites functionality, portability, and energy efficiency into a compact design. Its dual temperature zones, rapid cooling capabilities, user-friendly controls, and robust construction make it an excellent choice for anyone in need of reliable refrigeration on the go. Whether for outdoor adventures or extra home storage, the Whynter BR-125SD promises to meet diverse refrigeration needs efficiently.