Important Safety Instructions

WARNING

To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:

∙Read all instructions before using the appliance.

∙DANGER or WARNING: An empty cooler can be a hazardous for children or small pets. If disposing of the cooler, remove gasket seals, latches, lids or the entire door from your unused appliance, or take other action to ensure the cooler is harmless.

∙Never allow children to operate, play with, or crawl inside the appliance.

∙Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire hazard or explosion.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or

any other appliance. The fumes can create a fire hazard or explosion.

INSTALLATION INSTRUCTIONS

BEFORE USING YOUR APPLIANCE

∙Remove the exterior and interior packing.

∙Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

∙Clean the interior surface with lukewarm water using a soft cloth.

∙Install the handle on the door.

INSTALLATION OF YOUR APPLIANCE

∙This appliance is designed to be free standing only, and should not be recessed or built-in.

∙WARNING: Do not store or install the appliance outdoors.

∙CAUTION: This appliance is designed for storing and cooling beverage or wines. Do not store perishable food, medicine or other medical products.

∙Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.

∙Allow at least 5 inches (127mm) of space between the back and sides of the appliance are suggested, which allows the proper air circulation to cool the compressor and condenser.

∙It is recommended that you do not install the appliance on carpet.

∙To level your appliance, adjust the front leveling leg at the bottom of the appliance if needed.

∙It is recommended that you do not install the appliance near an oven, radiator or other heating source. Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. For best performance, do not install the appliance behind a cabinet door or block the base grille. Extreme cold ambient temperatures may also cause the appliance not to perform properly.

∙Avoid locating the appliance in area that may be exposed to excessive moisture.

∙Plug in the appliance into an exclusive, properly installed-grounded wall power outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a qualified electrician or an authorized service center. After plugging the appliance into a wall outlet, allow it to cool down for 2-3 hours before placing beverages in the appliance.

BR-125SD specifications

The Whynter BR-125SD stands out as a versatile and innovative solution in the world of portable refrigeration. Designed primarily for those who require a refrigerator/freezer that can efficiently manage temperature settings, this model shines with its advanced features and technologies.

One of the most impressive aspects of the Whynter BR-125SD is its dual temperature zones. Users can set the temperature between 0°F to 50°F, allowing for versatile storage options. The upper section functions as a refrigerator, while the lower section can be used as a freezer. This dual functionality makes it ideal for camping trips, road trips, or even as an extra fridge for tailgating events.

The BR-125SD boasts a powerful compressor cooling system, ensuring that your food and beverages stay at the desired temperature consistently. The unit can cool down rapidly, making it an efficient and reliable option for keeping perishables fresh over extended periods. Furthermore, the adjustable temperature control equipped with both digital LED display and an easy-to-use interface allows for precise temperature management.

Portability is another key feature of the Whynter BR-125SD. With a lightweight design and built-in handles, it can be transported effortlessly to various locations. Whether you're going on a camping adventure, picnic, or simply need extra storage at home, this refrigerator/freezer combo is crafted for convenience.

Additionally, this model is designed with energy efficiency in mind. It incorporates an eco-friendly refrigerant, ensuring a minimal environmental impact while still delivering powerful performance. The unit operates quietly, which is a significant consideration for users who need a discreet appliance.

Durability is another hallmark of the Whynter BR-125SD. Constructed with robust materials, it can withstand the rigors of outdoor use without compromising performance. The lid is designed to seal tightly, minimizing cold air loss and ultimately contributing to energy savings.

In summary, the Whynter BR-125SD unites functionality, portability, and energy efficiency into a compact design. Its dual temperature zones, rapid cooling capabilities, user-friendly controls, and robust construction make it an excellent choice for anyone in need of reliable refrigeration on the go. Whether for outdoor adventures or extra home storage, the Whynter BR-125SD promises to meet diverse refrigeration needs efficiently.