76
LSQT1484
Playback
With other
products 3With other video devices
[HDD] [SD]
You can create a playlist by gathering the scenes
on the HDD that you want to dub, then dub only
the scenes in this playlist to other devices.
(l59)
Use the AC adaptor to free you from worrying
about the battery running down.
1Connect this unit to a video

device.

2Turn on this unit, then rotate the

mode dial to select .

3Select the playback medium by

the menu. (l21)

4Start playback on this unit.

Then start recording on the

connected device.

To stop dubbing
Stop recording on the connected device.
Then stop playback on this unit.

Using SD card slot or USB

terminal of other video devices

If you have a DVD recorder with an SD card slot
or a USB terminal, images recorded by this unit
can be dubbed onto the hard disk or a DVD disc.
Refer to the operating instructions of your DVD
recorder for information about whether or not it
supports dubbing from an SD card or a USB
terminal.
When using a USB terminal
Connect this unit to a DVD recorder with the USB
cable (supplied), then select [PC/RECORDER]
on the USB function selection screen.
For details on how to dub the images, refer to
the operating instructions of the DVD recorder.

Dubbing images onto other

video devices

AAV cable (supplied)
Insert the plugs as far as they will go.
Do not use any other AV cables except
the supplied one.
Select the video input on the video
device and TV that this unit and the
video device are connected to.
VIDEO IN
AUDIO IN
[MEDIA SELECT] # [HDD] or
[SD CARD]
If you dub images and then play them back on
a wide-screen TV, they may be squeezed
horizontally. In this case, refer to the operating
instructions of the device you are dubbing to
or read the operating instructions of the wide-
screen TV and set the aspect setting to 16:9
(Full).
SDR-H90&80GN-LSQT1484_mst.book 76 ページ 2008年12月19日 金曜日 午後4時8分