Summit SW-23, S-23 Placing and Installation, Choosing the Right Place, Connection to Power Supply

Page 5

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regularly ventilated room. Allowed ambient temperature depends on the model (class) of the appliance. It is located on the rating plate of the appliance. Make sure the appliance is on a leveled floor that is strong enough to support the appliance when it is fully loaded.

Class

Ambient Temperature

SN (sub-normal)

from + 56°F to + 90°F

N (normal)

from + 62°F to + 90°F

ST (sub-tropical)

from + 64°F to +100°F

T (tropical)

from + 64°F to +120°F

The appliance may be exposed to lower or higher temperatures but only for shorter period of time and the temperature should never be lower than 41°F. Never place the appliance near heat emitting devices (e.g. cooker, radiator, water heater or similar devices) and do not expose it to direct sunlight. The appliance should be positioned 3cm from the electric or gas cooker. Behind the appliance there should be at least 200 cm² wide and above the appliance at least 5 cm away from the appliance in order to assure adequate ventilation of the condenser unit.

Placing the Self-Standing Appliance

•It is important to make sure the appliance is leveled evenly to prevent falling.

•Do not place the appliance in direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.

•The appliance with the ventilation grid may be placed close to the wall. The grid enables sufficient air circulation that is required for adequate ventilation of the rear wall.

Connection to Power Supply

Connect the appliance with the cable and plug to the power supply socket outlet with a ground terminal (safety socket).

“DO NOT USE AN EXTENSION CORD.”

Required nominal voltage and frequency are indicated on the rating plate.

The connection to the power supply and grounding has to be made according to current standards and regulations. The appliance resists temporary voltage tolerance up to -15 to 10%.

Instructions for Use

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Felix STORCH, INC Summit Appliance Division Model Types We Care for the Environment Before Putting Into UseTips for Energy Savings Instructions for UseTo reduce the risk of fire, electrical shock Disposing of the Worn Out ApplianceConnection to Power Supply Placing and InstallationClass Ambient Temperature Choosing the Right PlaceDescription of the Appliance Changing the Direction of Opening the Door Operation ControlCleaning the Appliance Maintenance and CleaningSwitch Off the Appliance When Not in Use Automatic Defrosting of the RefrigeratorContinuous Operation of the Refrigerating System Trouble-Shooting GuideIce Formation on the Inner Rear Wall Water is Leaking from the RefrigeratorNoise Before Calling for Service

CSW-34, S-23, SW-23, S-23L specifications

The Summit S-23L, SW-23, S-23, and CSW-34 are cutting-edge products designed for elevated performance and versatility in various applications. Each model showcases a unique blend of advanced features and innovative technologies tailored to meet the demands of today's dynamic environments.

The Summit S-23L is notable for its robust design, making it ideal for both industrial and commercial use. Its powerful motor and high torque enable it to handle heavy loads with ease. The S-23L features an intuitive control system that ensures precise navigation and operation, enhancing user experience. Additionally, its energy-efficient technology reduces operational costs while maximizing productivity.

Moving to the SW-23, this model is engineered for superior adaptability. It comes equipped with a state-of-the-art sensor system that detects environmental changes, allowing for seamless adjustments during operation. The SW-23's cutting-edge AI algorithms optimize performance, ensuring that tasks are completed efficiently and effectively. Built with durability in mind, the SW-23 can withstand harsh conditions, making it a reliable choice for any workspace.

The S-23 stands out with its sleek design and streamlined functionality. It integrates seamlessly with existing workflows, providing flexibility for a range of applications. The S-23 is equipped with advanced connectivity features, enabling real-time data tracking and performance monitoring. Its lightweight construction does not compromise on strength, allowing users to move it easily while still benefiting from its robust performance.

Lastly, the CSW-34 offers unique capabilities tailored for specialized tasks. With its modular design, users can customize the CSW-34 according to their specific requirements, enhancing its utility across various sectors. Its advanced communication systems facilitate multi-device connectivity, promoting cohesive operation among multiple units. The CSW-34 also boasts cutting-edge safety features, ensuring that users and surrounding environments are protected during operation.

Collectively, the Summit S-23L, SW-23, S-23, and CSW-34 epitomize innovation and practicality. They are designed with user-centric features that enhance productivity while prioritizing safety and efficiency. As industries continue to evolve, these models stand at the forefront, ready to meet and exceed the challenges of modern operational demands. Their versatility and advanced technologies solidify their place as essential tools for professionals seeking reliability and performance in their workflows.
Top Page Image Contents