Before Putting Into Use
Instructions for Use
These instructions are intended for the user. They describe the appliance and the correct and safe way to use it. The instructions were prepared for various models/types of refrigerators therefore you may find descriptions of some accessories and functions that do not apply to your appliance.
•Before connecting the appliance to the power supply, leave it standing for about 2 hours. This reduces the risk of malfunctions in the cooling system caused by shipping.
•Clean the appliance thoroughly; especially in the interior (See Cleaning and Maintenance).
We Care About the Environment
•Our appliances are distributed in packaging made of environmental friendly materials which can safely be recycled, disposed of or destroyed without any effects on the environment whatsoever.
•Our instruction manuals are printed on recycled paper or chlorine free bleached paper.
Tips for Energy Savings
•Try not to open the drawers too often, especially when the weather is hot and humid. Once you open a drawer try to close it as soon as possible.
•Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
•Set thermostat from higher to lower settings (depending on how loaded the appliance is, the ambient temperature etc...).
•The coils on the rear of the refrigerator should be cleaned and free of dust or any impurities.
•Always consider instructions stated in the Energy Saving Tips section, otherwise the energy consumption is substantially higher.
Instructions for Use
2