Summit FF-7, FF-6 Cleaning the Appliance, Switch Off the Appliance When Not in Use

Page 8
Cleaning the Appliance

There is no need to defrost the refrigerator, because the ice depositing on the inner back wall is defrosted automatically.

Ice may deposit on the inner back wall during the compressor operation; later on when the compressor is not operating, the ice is defrosted and the water is collected and drained through the outlet in the inner back wall into the drain pan situated above the compressor where it is evaporated.

Cleaning the Appliance

Disconnect the power supply before cleaning the appliance. Do not use coarse or aggressive cleaning agents as you can damage the surface.

Clean the exterior with water and a mild detergent. Varnished surfaces are cleaned with soft cloth and a non-abrasive cleaning agent (for example glass cleaners). You may also use stainless steel cleaner if you have a

stainless steel model.

Remove the detachable accessories in the interior of the appliance and clean it with water and liquid detergent. Plastic parts cannot be washed in a washing machine.

Wash the interior of the appliance with lukewarm water, in which you add one or two spoonfuls of vinegar.

Every now and then wipe the condenser on the rear wall. Use a soft non-

metal brush.

Do not forget to clean the defrost water receptacle above the refrigerators compressor (do not remove the receptacle). After cleaning, connect the appliance to the power supply and reload the packages.

Switch Off the Appliance When

Not in Use

If you do not intend to use the appliance for an extensive period of time, set the thermostat knob to the STOP (0) position and disconnect the power supply. Then take out the foods and clean the appliance. Leave the door slightly open.

Instructions for Use

8

Image 8
Contents FELIX STORCH, INC SUMMIT APPLIANCE DIVISION All Variations of the FF-7 All Variations of the SCR-600L/SCR-600BLALL-REFRIGERATOR Table of Contents Placing and InstallationMaintenance and Cleaning Write the model and serial numbers here Model# Serial #Before Putting Into UsE We Care for the EnvironmentTips for Energy Savings Instructions for UseDisposing of the Worn Out Appliance “DO NOT USE AN EXTENSION CORD.” PLACING AND INSTALLATIONConnection to Power Supply To turn the refrigerator off you must turn the thermostat to 0 off How To Adjust The ThermostatOperation control Storing Fresh Foods automatic DefrostingCleaning the Appliance Switch Off the Appliance When Not in UseDoor swing reversal Adjusting the Level legs Trouble-Shooting GuideProblem #1 Appliance Fails to Operate After Connecting to the Power SupplySolution Problem #3Noise Ice Formation on the Inner Rear WallSpecifications are Subject to Change Without Noti1ce Before Calling for Service Check the plug and fuseTest the outlet with a lamp