Trouble-Shooting Guide

During the service of your appliance, you can come across some troubles that in most cases result from improper handling of the appliance that can easily be eliminated.

The Appliance Fails to Operate After Connecting to the Power Supply

Check the supply in the outlet socket and make sure the appliance is switched on (thermostat in the operating position).

Continuous Operation of the Refrigerating System

The door was frequently opened or it was left open too long.

The door is not properly closed (the door may sag; the gasket may be polluted or damaged).

Perhaps you have overloaded the appliance with fresh foods. The reason may be inadequate ventilation of the compressor and condenser (assures adequate air circulation and wipe off the condenser).

Ice Formation on the Inner Rear Wall

As long as the defrost water runs to the channel and through the opening to the drain pan on the compressor, automatic defrosting of the appliance is assured. In case the ice formation on the inner back wall is increased (1/8”), ice should be manually defrosted.

Set the thermostat knob to STOP (0) position and leave the door open. Never use electric devices for defrosting and do not scrape the ice or frost layer with sharp objects. After completed defrosting, turn the knob to desired position and close the refrigerator door.

The cause of increased ice formation may be one of the following reasons:

-the door does not seal well (clean the gasket if it is contaminated, or replace it if it is damaged).

-The door was frequently opened or it was left opened for too long.

-The food stored in the refrigerator was warm.

-The food or dish is touching the inner back wall.

Water is Leaking from the Refrigerator

In case the discharged water outlet is clogged, or the defrost water drips over the channel, or water leaks from the refrigerator just clean the clogged opening with a plastic straw. Manually defrost the increased ice layer. See “Ice Formation on the Inner Back Wall”.

Instructions for Use

CP-35B, CP-35BLL, CP-35LL, CP-35, CP-36R specifications

The Summit CP-36R, CP-35, CP-35LL, CP-35BLL, and CP-35B models are a line of high-performance motorcycle helmets designed for both comfort and safety. These helmets are engineered with cutting-edge technology and features that cater to the modern rider’s needs.

One of the standout features of these helmets is their lightweight construction, thanks to the advanced composite materials used in their shells. This design not only ensures rider comfort during long journeys but also enhances aerodynamics, reducing wind resistance at higher speeds. The CP-36R, for instance, is known for its superior ventilation system, which includes strategically placed air vents that promote airflow, keeping the rider cool even in warmer conditions.

All models are equipped with an EPS (Expanded Polystyrene) liner that absorbs impact energy, significantly increasing safety during potential collisions. The multi-density foam used in these liners provides optimal protection while maintaining a comfortable fit. The helmets also feature a quick-release visor system, allowing riders to easily change or clean their visors without the need for additional tools.

Additionally, the CP-35LL and CP-35BLL models are particularly noted for their extended interior cushioning, providing all-day comfort for riders who log many miles on their bikes. The interior lining is made from moisture-wicking fabric, which not only keeps the helmet fresh but also aids in temperature regulation.

For enhanced visibility and safety, these helmets come with an anti-fog and scratch-resistant visor, ensuring that riders maintain a clear line of sight in various weather conditions. The CP-35B model stands out with its integrated Bluetooth compatibility, enabling hands-free communication, music streaming, and GPS navigation without sacrificing focus on the road.

In terms of aesthetics, the Summit helmets boast a variety of color options and finishes, allowing riders to express their personal style while adhering to safety standards. The helmets meet or exceed rigorous safety certifications, ensuring peace of mind for both casual and professional riders.

In summary, the Summit CP-36R, CP-35, CP-35LL, CP-35BLL, and CP-35B helmets represent a fusion of advanced safety features, innovative technology, and rider-centric design. They are ideal choices for anyone seeking a reliable, stylish, and comfortable helmet for their motorcycle adventures.