Summit CT-66 instruction manual Trouble-Shooting Guide, Switch Off the Appliance When Not in Use

Page 11

Switch Off the Appliance When Not in Use

If you do not intend to use the appliance for a longer period of time set the thermostat knob to the STOP (0) position and disconnect the power supply. Then take out the foods and defrost and clean the appliance. Leave the door slightly open.

Trouble-Shooting Guide

During the service of your appliance, you can come across some troubles that in most cases result from improper handling of the appliance that can easily be eliminated.

The Appliance Fails to Operate After Connecting to the Power Supply

•Check the supply in the outlet socket and make sure the appliance is switched on (thermostat in the operating position).

Continuous Operation of the Refrigerating System

•The door was frequently opened or it was left open too long.

•The door is not properly closed (the door may sag; the gasket may be polluted or damaged).

•Perhaps you have overloaded the appliance with fresh foods.

•The reason may be inadequate ventilation of the compressor and condenser (assures adequate air circulation and wipe off the condenser).

Ice Formation on the Inner Rear Wall

As long as the defrost water runs to the channel and through the opening to the drain pan on the compressor, automatic defrosting of the appliance is assured. In case the ice formation on the inner back wall is increased (1/8”), ice should be manually defrosted.

Set the thermostat knob to STOP (0) position and leave the door open. Never use electric devices for defrosting and do not scrape the ice or frost layer with sharp objects. After completed defrosting, turn the knob to desired position and close the refrigerator door.

The cause of increased ice formation may be one of the following reasons:

-the door does not seal well (clean the gasket if it is contaminated, or replace it if it is damaged).

-The door was frequently opened or it was left opened for too long.

-The food stored in the refrigerator was warm.

-The food or dish is touching the inner back wall.

Water is Leaking from the Refrigerator

In case the discharged water outlet is clogged, or the defrost water drips over the channel, or water leaks from the refrigerator just clean the clogged opening with a plastic straw. Manually defrost the increased ice layer. See “Ice Formation on the Inner Back Wall”.

Instructions for Use

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Felix STORCH, INC Summit Appliance Division Mounting Instructions Before Putting Into UseWe Care for the Environment Tips for Energy SavingsDisposing of the Worn Out Appliance Choosing the Right Place Placing and InstallationConnection to Power Supply Class Ambient TemperatureOperation Control Temperature SelectionArticle of Food UseFresh Food Storage Time in the Refrigerator Storing Fresh FoodsStoring Frozen Foods Freezing Fresh FoodsCommercially Frozen Foods Defrosting Frozen FoodIce Making Changing the Direction of Opening the Door Automatic Defrosting of the Refrigerator Maintenance and CleaningCleaning the Appliance Manual Defrosting of the Low Temperature CompartmentIce Formation on the Inner Rear Wall Trouble-Shooting GuideSwitch Off the Appliance When Not in Use Continuous Operation of the Refrigerating SystemNoise Bulb Replacement

CT-66 specifications

The Summit CT-66 is a highly regarded model in the world of compact musical instruments, particularly favored by musicians who seek a blend of portability and comprehensive features. This instrument has been designed with precision and care, making it an ideal choice for both novice and experienced players.

One of the standout features of the Summit CT-66 is its lightweight construction. Weighing significantly less than traditional compact instruments, it is perfect for musicians on the move, allowing them to transport it easily without sacrificing sound quality. The durability of its materials ensures that it can withstand the rigors of travel and frequent use.

The Summit CT-66 employs advanced technology that enhances its sound output. It boasts a state-of-the-art soundboard made from high-quality materials that enhance resonance and projection. The vocal clarity is notable, making it suitable for performances ranging from intimate gigs to larger venues. The instrument’s design also incorporates innovative pickup systems that capture the true essence of sound, delivering a rich tonal palette.

In terms of connectivity, the CT-66 is equipped with multiple output options, making it compatible with various amplification systems and recording devices. This feature is particularly beneficial for modern musicians who rely on technology for their performances and productions. The instrument's intuitive interface allows for easy adjustments, ensuring that musicians can focus more on their craft and less on the technical aspects.

Another impressive aspect of the Summit CT-66 is its versatility. It is designed to accommodate various playing styles, from strumming to fingerpicking, providing a range of tones suitable for different genres. The craftsmanship involved in the creation of the CT-66 not only enhances its aesthetic appeal but also ensures premium sound quality, making it a reliable companion for any musician.

The ergonomic design of the Summit CT-66 guarantees comfort during extended play sessions. The neck is designed for smooth playability, allowing for effortless transitions between chords and notes. This attention to detail makes it a favorite among performers who value both comfort and performance.

Overall, the Summit CT-66 stands out in a crowded market due to its combination of portability, advanced technology, and exceptional sound quality. It is a perfect choice for musicians seeking an instrument that supports their creativity while being easy to handle and versatile enough to suit a wide range of musical genres.
Top Page Image Contents