Summit CT-66 Placing and Installation, Choosing the Right Place, Connection to Power Supply

Page 4

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regularly ventilated room. Allowed ambient temperature depends on the model (class) of the appliance and is stated on the rating plate of the appliance.

Class

Ambient Temperature

SN (sub-normal)

from + 56°F to + 90°F

N (normal)

from + 62°F to + 90°F

ST (sub-tropical)

from + 64°F to +100°F

T (tropical)

from + 64°F to +120°F

The appliance may be exposed to lower or higher temperatures but only for a shorter period of time and the temperature should never be lower than 41°F. Never place the appliance near heat emitting devices (e.g. cooker, radiator, water heater or similar devices) and do not expose it to direct sunlight.

Placing the Self-Standing Appliance

It is important to make sure the appliance is leveled evenly to prevent falling.

Two spacers attached to the appliance must be fitted onto the upper edge of the condenser, thus preventing the appliance from being installed too close to the wall. Spacers are manufactured for all-purpose functions depending on the distance of the condenser from the wall. Therefore turn spacers correspondingly and adjust them accordingly to the appliance.

Connection to Power Supply

Connect the appliance with the cable and plug to the power supply socket outlet with a ground terminal (safety socket).

“DO NOT USE AN EXTENSION CORD.”

Required nominal voltage and frequency are indicated on the rating plate.

The connection to the power supply and grounding has to be made according to current standards and regulations. The appliance resists temporary voltage tolerance up to -15 to 10%.

Instructions for Use

Image 4
Contents Felix STORCH, INC Summit Appliance Division Before Putting Into Use We Care for the EnvironmentTips for Energy Savings Mounting InstructionsDisposing of the Worn Out Appliance Placing and Installation Connection to Power SupplyClass Ambient Temperature Choosing the Right PlaceTemperature Selection Operation ControlUse Fresh Food Storage Time in the RefrigeratorStoring Fresh Foods Article of FoodFreezing Fresh Foods Storing Frozen FoodsIce Making Defrosting Frozen FoodCommercially Frozen Foods Changing the Direction of Opening the Door Maintenance and Cleaning Cleaning the ApplianceManual Defrosting of the Low Temperature Compartment Automatic Defrosting of the RefrigeratorTrouble-Shooting Guide Switch Off the Appliance When Not in UseContinuous Operation of the Refrigerating System Ice Formation on the Inner Rear WallBulb Replacement Noise

CT-66 specifications

The Summit CT-66 is a highly regarded model in the world of compact musical instruments, particularly favored by musicians who seek a blend of portability and comprehensive features. This instrument has been designed with precision and care, making it an ideal choice for both novice and experienced players.

One of the standout features of the Summit CT-66 is its lightweight construction. Weighing significantly less than traditional compact instruments, it is perfect for musicians on the move, allowing them to transport it easily without sacrificing sound quality. The durability of its materials ensures that it can withstand the rigors of travel and frequent use.

The Summit CT-66 employs advanced technology that enhances its sound output. It boasts a state-of-the-art soundboard made from high-quality materials that enhance resonance and projection. The vocal clarity is notable, making it suitable for performances ranging from intimate gigs to larger venues. The instrument’s design also incorporates innovative pickup systems that capture the true essence of sound, delivering a rich tonal palette.

In terms of connectivity, the CT-66 is equipped with multiple output options, making it compatible with various amplification systems and recording devices. This feature is particularly beneficial for modern musicians who rely on technology for their performances and productions. The instrument's intuitive interface allows for easy adjustments, ensuring that musicians can focus more on their craft and less on the technical aspects.

Another impressive aspect of the Summit CT-66 is its versatility. It is designed to accommodate various playing styles, from strumming to fingerpicking, providing a range of tones suitable for different genres. The craftsmanship involved in the creation of the CT-66 not only enhances its aesthetic appeal but also ensures premium sound quality, making it a reliable companion for any musician.

The ergonomic design of the Summit CT-66 guarantees comfort during extended play sessions. The neck is designed for smooth playability, allowing for effortless transitions between chords and notes. This attention to detail makes it a favorite among performers who value both comfort and performance.

Overall, the Summit CT-66 stands out in a crowded market due to its combination of portability, advanced technology, and exceptional sound quality. It is a perfect choice for musicians seeking an instrument that supports their creativity while being easy to handle and versatile enough to suit a wide range of musical genres.