Sub-Zero 424G / 424FSG, WS-30, 427G / 427RG manual Trim Installation, Door Stop

Page 17

MODEL 427G / 427RG INSTALLATION

Completion

TRIM INSTALLATION

Install decorative trim strips to the top and sides of the unit. Attach the top trim using the double-sided velcro, then snap side trim over brackets on the sides of the unit. Refer to the illustration below.

HOME SECURITY CONNECTION

If the unit will be connected to a home security system, make connections to the leads shown in the illustration below. Refer to the following color codes:

Normally open contacts—white with red stripe wire.

Normally closed contacts—white with blue stripe wire.

Common—gray with white stripe wire.

Use the spade terminals or wire nuts provided to make proper wiring connections.

CAUTION

The alarm circuit in the unit is intended as a low- voltage, low-current device only. It should not be used to switch line power. Any unused terminals should be completely insulated and all wires should be secured away from conductive or moving components.

 

TOP TRIM

HOME SECURITY

 

LEADS

SIDE TRIM

Home security connection.

Trim installation.

KICKPLATE INSTALLATION

Install the kickplate using the screws provided. The mounting bracket may be adjusted slightly for a flush fit. The kickplate must be removable for service. The floor cannot interfere with removal. Refer to the illustration below.

A decorative kickplate can be added to the factory-installed kickplate but cannot block the kickplate louvers.

Turn power on by touching POWER on the control panel.

90° DOOR STOP

The door opens to 105°. A 90° door stop is built into the hinge system for installations where the door opening must be limited.

To engage the door stop, use a standard screwdriver and rotate the center cam of the hinge. The adjustment must be made to both upper and lower hinges. Refer to the illustra- tion below.

MOUNTING

BRACKET

Kickplate installation.

90° door stop.

subzero.com 17

Image 17
Contents Wine Storage Installation Guide Important Note ContentsTools and Materials Product InformationDual Installation Opening DimensionsModel 424G / 424FSG Site Preparation Models 424G and 424FSGElectrical Requirements ElectricalPreparation Model 424FSG Anti-Tip BracketModel 424G Custom Panel Model 424G / 424FSG InstallationDoor Adjustment PlacementAlignment LevelingCompletion Kickplate InstallationHome Security Connection AnchoringFULL-SCALE Template Door ClearanceOpening Model 427G / 427RG Site PreparationModels 427G and 427RG Control cable model 427RG Wood Floor ANTI-TIP HardwareConcrete Floor ANTI-TIP BracketConcrete Wedge Anchor Installation Model 427G / 427RG InstallationCustom Panels Panel RequirementsDrawer Panels Model 427RG Panel InstallationFront adjustment Rear adjustment Sub-Zero Customer Care Door Stop Trim InstallationModel WS-30 Site Preparation Standard InstallationFlush Inset Width Flush Inset InstallationDual Standard Installation Dual Flush Inset Installation Dual Installation Grille removal Grille mounting screws Subzero.com Wood floor Concrete floor Sub-Zero Customer Care Model WS-30 Installation Door side trim Door PanelSide Panel Grille PanelLeveling Sub-Zero Customer Care Grille Installation Top anchoring Bottom anchoring Sub-Zero Customer Care Kickplate installation Almacenamiento DE Vinos ContenidoAviso importante Herramientas y materiales Información del productoPreparación DEL Sitio Para Modelos 424G / 424FSG Dimensiones de aberturaModelos 424G Y 424FSG Instalación DobleRequisitos Eléctricos Instalación eléctricaPreparación Modelo 424FSG Soporte antivuelcoModelo 424G Instalación DE Modelos 424G / 424FSG Panel PersonalizadoAlineación ColocaciónNivelación Ajuste DE LA PuertaConexión a Líneas DE Seguridad DEL Hogar FinalizaciónAnclaje Instalación DEL ZócaloPlantilla a Escala Completa Espacio de la puertaModelos 427G Y 427RG Preparación DEL Sitio Para Modelos 427G / 427RGConexión a tierra de 3 clavijas Suelo DE Madera Piezas DE Montaje AntivuelcoPiso DE Concreto Soporte AntivuelcoInstalación DE Modelos 427G / 427RG Paneles personalizadosInstalación DE LAS Anclas DE Cuña Para Concreto Requisitos DEL PanelPaneles DE LOS Cajones Model 427RG Instalación de los panelesColocación Tope Para Puerta a Instalación DEL RibeteInstalación Estándar Preparación DEL Sitio Para Modelo WS-3026 3 Instalación EmpotrableAnchura DE Abertura Instalación Estándar Doble263/16 Instalación DE DOS Unidades EmpotrableInstalación doble Tornillo Mínimo Instalación DE Modelo WS-30 Ribete del lado de la puerta Panel DE LA PuertaPanel Lateral Panel DE RejillaNivelación Atención al cliente de Sub-Zero Instalación DE LA Rejilla Líneas DE Advertencia Cellier À Vins Table des matièresRemarque importante Outils et matériaux Renseignements sur le produitInstallation Double Dimensions de l’ouverturePrépartion DU Site Pour LES Modèles 424G / 424FSG Modèles 424G ET 424FSGExigences Électriques ÉlectricitéPréparation Modèle 424FSG Support antibasculementModèle 424G Panneau personnalisé Installation DES Modèles 424G / 424FSGAlignement Mise en placeNivellement Réglage DE LA PorteInstallation DE LA Plaque DE Protection Connexion AU Système D’ALARME RésidentielAchèvement AncrageGabarit Pleine Grandeur Dégagement de la porteModèles 427G ET 427RG Préparation DU Site Pour LES Modèles 427G / 427RGCâble de contrôle Plancher EN Bois Quincaillerie AntibasculementPlancher EN Béton Support AntibasculementInstallation DE LA Cale D’ANCRAGE Pour Béton Installation DES Modèles 427G / 427RGPanneaux personnalisés Exigences DU PanneauPanneaux DE Tiroir Modèle 427RG Installation des panneauxMise en place Butée DE Porte DE Installation DE LA GarniturePréparation DU Site Pour LE Modèle WS-30 Installation Standard263/16 po Installation À AffleurementLargeur DE L’OUVERTURE Installation Double Standard4 po 26 3 / 16 po Installation Double À AffleurementInstallation double Retrait de la grille Vis de montage de la grille Subzero.com Plaque Wall Plate Murale Installation DU Modèle WS-30 Garniture latérale de porte Panneau DE PortePanneau Latéral Panneau DE LA GrilleNivellement Service à la clientèle de Sub-Zero Réglage de la hauteur de la grille Installation DE LA GrilleAncrage supérieur Installation de la plaque de protection SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM
Related manuals
Manual 2 pages 46.22 Kb

424G / 424FSG, 427G / 427RG, WS-30 specifications

Sub-Zero, a name synonymous with high-end refrigeration, offers a range of premium products that cater to the home chef's needs, particularly the WS-30,427G/427RG, and 424G/424FSG models. These integrated refrigerators are designed to deliver superior performance while seamlessly blending into your kitchen decor.

One of the standout features of the Sub-Zero WS-30 and 427 models is their advanced preservation technology. With dual refrigeration systems, each compartment maintains optimal temperatures and humidity levels. This is essential for preserving the freshness and flavor of your food and extends the shelf life of perishable items. The models also feature a patented air purification system that filters out impurities, ensuring that your food stays fresher longer.

Another key characteristic is the design flexibility. The WS-30 and 427G/427RG models offer custom panel options that allow these units to be integrated into your kitchen aesthetically. The 424G and 424FSG models come with a range of finishes, including stainless steel, which complements modern kitchen designs. The units can be installed flush with cabinetry, giving your kitchen a sleek, streamlined appearance.

The interior layout of these models is engineered for convenience and accessibility. Adjustable shelves and deep bins maximize storage potential, allowing you to organize your groceries efficiently. The soft-close doors and drawers ensure quiet operation and long-lasting durability, while LED lighting enhances visibility and highlights the elegance of the interior.

User-friendly features are also prevalent in these Sub-Zero models. The intuitive temperature controls and digital displays make it easy to monitor and adjust settings to suit your specific storage needs. The ice and water dispensers in the 427RG and 424FSG models provide added convenience while incorporating advanced filtration for purified drinking water and ice.

In terms of energy efficiency, Sub-Zero refrigerators are built to comply with strict energy standards, helping you save on utility bills while being environmentally conscious.

In summary, the Sub-Zero WS-30,427G/427RG, and 424G/424FSG models combine cutting-edge technology, superior design, and exceptional performance, making them ideal choices for discerning homeowners looking to invest in a high-quality refrigeration solution. With a focus on food preservation, aesthetic integration, and user convenience, these refrigerators exemplify the ideal blend of function and style.