Sub-Zero I663418(R) Wolf Ventilation Recommendations, L F B L O W E R a S S E M B L I E S

Planning Information

Wolf Ventilation Recommendations

W O L F B L O W E R A S S E M B L I E S

A ventilation system must include a blower assembly. With a few exceptions where internal blowers are included, Wolf ventilation hoods and downdrafts are shipped without the blower assembly. An internal, in-line or remote blower assembly must be selected to accommodate the cooking appliance, CFM requirements and home- owner preferences. Internal, in-line and remote blower assemblies are available as sales acces- sories through your Wolf dealer.

Wolf internal, in-line and remote blowers are for use with Wolf cooktop hoods, downdraft systems and Pro ventilation hoods and hood liners.

IMPORTANT NOTE: Use only a Wolf blower with all Wolf ventilation products.

Internal blowers are mounted inside the hood canopy or downdraft blower box. In-line blowers are mounted in between the hood and the exterior of the home. Remote blowers can be mounted on the roof or in some cases, on an exterior wall. Refer to the illustrations below for dimensions of Wolf in-line and remote blowers.

Ventilation recommendation charts on the following pages provide minimum CFM recom- mendations according to the cooking appliance and ventilation system used and blower options for each specific ventilation hood or downdraft.

	243/8"
	(619)
113/4"
(298)
181/2"
(470)
	41/2"
	(114)
211/2"	121/4"
(546)
	(311)

In-line BLOWER-60IL

		203/4"
281/4"		(527)
(718)	10" (254)
	Diameter
151/2"		241/2"
(394)
		(622)
	14"
	(356)
	243/4"	43/4"
		(121)
	(629)

Remote BLOWER-60REM and BLOWER-90REM

		247/8"
		(632)
18"	12"
(457)
	(305)
		8"
		(203)
	22"	18"
	(559)	(457)

In-line BLOWER-110IL

	18" (457)
	10"
291/2"	(254)
(749)
10" (254)
Diameter
143/4"	1
(375)	29 /2"
	(749)
101/8"
(257)
22"	71/4"
(559)	(184)

Remote BLOWER-120REM

	21" (533)
	10"
291/2"	(254)
(749)
10" (254)
Diameter
143/4"	291/2"
(375)
	(749)
103/8"
(264)
25"	71/4"
(635)	(184)

Remote BLOWER-150REM

Dimensions may vary by ± 1/8" (3).

Dimensions in parentheses are in
millimeters unless otherwise specified.	7