VIII. e Incomplete Thawing | Traulsen RET132EUT, RET232EUT specs

VIII. EXPECTED THAW PERFORMANCE/OPERATIONAL TROUBLESHOOTING

(continued)

VIII. e - INCOMPLETE THAWING:

In operation, incomplete thawing (i.e. bags of product in which not every piece was completely thawed) has been found to usually be the result of those pkgs. respective pan level having had restricted airflow due to overloading (from stacked pkgs. or irregular shaped packages that blocks air from getting to the pkgs. closest to the cabinet interior side wall or rear). Allowing for proper air-flow around each pkgs. of frozen product should eliminate this situation from occurring.

VIII. f - EQUIPMENT ISSUES:

If improper loading has been eliminated as a possible cause for extended thaw cycle times, there are several system checks which can be done to diagnose the Traulsen Even- Thaw unit.

First, the amp draw should be checked early in the thaw cycle. This is a 1300 watt heater, 115 vac, is about 11.3 amps. Add 4 blowers at 1.1 amps and a few amps for the controls and the total amp draw should be approximately 16 to 16.5 amps.

If your amp reading is different, call Traulsen technical sup- port to help diagnose the problem.

VIII. g - OTHER CAUSES OF EXTENDED THAW TIMES: Some frozen products are often stored in large, irregularly shaped packages. If used, these should always be located along the outside wall with the largest packages being placed closest to, but not directly against, the wall. It is IMPERA- TIVE that such large packages not be placed up against the center mullion air ducts. This could result in blocked airflow.

REDUCED AIR MOVEMENT EQUATES TO LONGER

THAWING TIMES.

Care should also be taken to avoid pushing other pkgs. of frozen product up against the mullion sheet metalducts. Airflow could be blocked resulting in a similarextended thaw time situation. Another scenario to avoid is for packages to be placed inadvertently up against the outside walls. They will also block air flow down the sides of the unit. This is especially an issue with the right side wall because when the unit returns to normal refrigerated operation mode, the cold air flows from the upper right ceiling evaporator outlet, down the wall, and then mixes into the cabinet, distributed by all the mullion blowers. If the right wall is blocked, and especially if blocked near the top right of the cabinet, the cold evaporator exit air can be short circuited on to the top two or three upper right hand levels and be routed right back to the return evaporator inlet duct. Therefore, those upper shelves could get very cold and perhaps a substantial amount of product on the right side could become very cold and pos- sibly even refreeze (as the evaporator outlet air temperature is 20 degrees F).

-7-

RET132EUT, RET232NUT, RET232EUT specifications

The Traulsen RET232EUT, RET232NUT, and RET132EUT are commercial refrigerators designed to meet the rigorous demands of the food service industry. Renowned for their reliability, efficiency, and innovative features, these models ensure that perishable goods are stored safely and at the optimal temperature.

One of the standout features of the Traulsen RET232EUT and RET232NUT is their energy efficiency. These refrigerators are equipped with high-performance, energy-saving compressors that reduce electricity consumption while maintaining precise temperature control. This not only lowers operational costs but also minimizes the environmental impact of refrigeration. The self-contained refrigeration system allows for easy access and maintenance, making them user-friendly for busy kitchen environments.

The Traulsen RET132EUT, on the other hand, is designed with a specific focus on maximizing storage capacity within a compact footprint. With its durable stainless steel exterior and aluminum interior, it is built to withstand the rigors of daily use while ensuring longevity. This model features adjustable, heavy-duty shelves that provide flexibility in organizing products, accommodating various sizes and shapes of food items.

All models feature digital temperature controls, which allow for accurate monitoring and adjustments. This advanced technology ensures that the inside temperature stays within the desired range, protecting food quality and safety. The easy-to-read LED display offers clear visibility of the internal temperature, enhancing usability in fast-paced kitchen settings.

The RET232EUT and RET132EUT models also boast a unique air distribution system that guarantees even cooling throughout the cabinet. This design feature is crucial in preventing temperature fluctuations that could compromise food safety. Additionally, the interior is equipped with an easily accessible drainage system that simplifies cleaning and sanitation procedures.

Safety features, such as door locks and integrated alarms, are also present in these models. These elements ensure that food is not only stored at optimal temperatures but also protected from unauthorized access.

In summary, the Traulsen RET232EUT, RET232NUT, and RET132EUT models exemplify quality and innovation in commercial refrigeration. Their combination of energy efficiency, robust design, advanced temperature control, and user-friendly features make them an ideal choice for restaurants, catering services, and other food service operations, ensuring food safety and reliability in kitchen environments.