Dimensional Data RHT232NUTSL RHT232WUTSL

Project	Quantity	Item #
Model Specified:		CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, one piece sides and louver assembly are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior is constructed of stainless steel. The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included.

Tempered sliding glass doors are self-closing, with a stay open feature in the fully opened position, and are easily removable for cleaning. An exterior ON/OFF switch is provided to activate the interior fluorescent lighting. Anti condensate heaters are located behind each door opening.

Cabinet is insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA	RHT232NUTSL	RHT232WUTSL

Net capacity cu. ft.	46.0 (1303 cu l)	51.6 (1462 cu l)
Length - overall in.	521⁄8 (132.4 cm)	58 (147.3 cm)
Depth - overall in.	33 (83.8 cm)	33 (83.8 cm)
Depth - over body in.	32 (81.3 cm)	32 (81.3 cm)
Clear door width in.	19 (48.3 cm)	22 (55.9 cm)
Clear half-door height in.	251⁄2 (64.9 cm)	251⁄2 (64.9 cm)
Clear full-door height in.	573⁄4 (146.7 cm)	573⁄4 (146.7 cm)
Height - overall on 6" legs	831⁄4 (211.5 cm)	831⁄4 (211.5 cm)
No. Standard Shelves	6	6
Shelf area sq. ft.1	34.6 (3.2 sq m)	37.6 (3.49 sq m)
Net Wt. lbs.	560 (254 kg)	630 (286 kg)
Gross Wt. lbs.	700 (318 kg)	770 (349 kg)
ELECTRICAL DATA

Voltage	115/60/1	115/60/1

Feed wires with Ground	3	3

Full load amperes	15.9	15.9
REFRIGERATION DATA
Refrigerant	R-134a	R-134a
BTU/HR H.P.2	5120 (3⁄4 HP)	5120 (3⁄4 HP)

NOTES

NOTE: Figures in parentheses reflect metric equivalents.

1= Area of standard shelf compliment only, does not include storage area of additional shelves or available on cabinet bottom.

2= Based on a 90 degree F ambient and 20 degree F evaporator.

3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information on remote models, please refer to spec sheet 12-2.

Refrigeration System

Atop mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant INTELA-TRAUL®microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant. Third party software required for network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius Temperature Scale Display Capability, and an RS485 data port. In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.

Interior

Standard interior arrangements include three (3) chrome plated wire shelves per section, mounted on pilasters. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Optional tray slides may be purchased in combination with, or in lieu of these. Both standard and optional interior arrangements are completely installed at the factory.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self- contained models only) are provided standard. An optional 2nd year extended parts and labor warranty is also available. In addition the INTELA-TRAUL®control is warranted by a two year parts and labor warranty.

Elevation - RHT232NUTSL Elevation - RHT232WUTSL

Plan - RHT232NUTSLPlan - RHT232WUTSL

Equipped With One NEMA 5-20P Plug

NOTE: Full load amps and plug style may vary depending on electrical options chosen and condensing unit employed.

REQUIRED CLEARANCES

In order to assure optimum performance, the condensing unit MUST have an adequate supply of air for cooling purposes. Therefore, the operating location must either have a minimum of 12” clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit. Clearance of at least 12” above is required in order to perform certain maintenance tasks.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any additional warranties.

Continued product development may necessitate specification changes without notice.

Part No. TR35825 (revised 1/07)		Section - All Models

SECTION	TRAULSEN
SECTION	4401 BLUE MOUND RD.	FT. WORTH, TX 76106
11-1	PHONE 1 (800) 825-8220	FAX-MKTG. 1 (817) 624-4302
	Website: www.traulsen.com

RHT232NUT-HSL, RHT232NUT-FSL, RHT232WUT-HSL, RHT232WUT-FSL specifications

Traulsen is a renowned name in the commercial refrigeration industry, known for manufacturing high-quality, durable, and efficient refrigeration units for foodservice operations. Among their impressive lineup are the Traulsen RHT232WUT-FSL, RHT232WUT-HSL, RHT232NUT-FSL, and RHT232NUT-HSL. These units are designed to cater to the rigorous demands of commercial kitchens while ensuring optimal performance and reliability.

The RHT232 Series units are designed with exceptional features that make them stand out in the marketplace. One of their main characteristics is the robust construction, which includes stainless steel exteriors that provide durability and easy cleaning. This is crucial in fast-paced environments where hygiene and efficiency are paramount. The interiors are also designed for maximum usability, featuring stainless steel for added resilience and an easy-to-maintain environment.

These units come with advanced refrigeration technology that ensures precise temperature control, maintaining optimal conditions for food preservation. The units are equipped with a powerful refrigeration system that offers consistent cooling, making them ideal for storing perishable items like meat, dairy, and vegetables. Additionally, the units utilize environmentally friendly refrigerants, in compliance with modern regulations, thus contributing to sustainability efforts in commercial establishments.

The RHT232WUT-FSL and RHT232WUT-HSL models specifically feature a self-closing door design, enhancing energy efficiency by preventing cold air from escaping. The RHT232NUT-FSL and RHT232NUT-HSL variants offer similar functionalities with unique design adaptations for different kitchen layouts. All models incorporate high-density, foamed-in-place insulation, ensuring energy efficiency and reducing operational costs.

In terms of user-friendliness, these Traulsen units are equipped with dependable electronic controls that allow for easy monitoring and adjustment of temperatures, ensuring consistent performance without complications. An appealing feature is the automatic defrost system, which minimizes maintenance and enhances reliability.

In conclusion, the Traulsen RHT232WUT-FSL, RHT232WUT-HSL, RHT232NUT-FSL, and RHT232NUT-HSL refrigeration units are exemplary choices for commercial kitchens seeking durability, efficiency, and advanced refrigeration technology. With their robust construction, energy-efficient features, and user-friendly controls, these units not only meet but exceed the operational needs of foodservice professionals.

Specifications

Construction, Hardware and Insulation