Care & Maintenance cont’d, VI. Other

V. CARE & MAINTENANCE (cont’d)

V. c - REPLACING THE GASKETS:

To remove the gasket to be replaced, grasp it firmly by one corner and pull it out. Before attempting to install a new gasket, both the unit and the gasket it- self must be at room temperature. Insert the four cor- ners first by using a rubber mallet (or hammer with a block of wood). After the corners are properly inserted, work your way towards the center from both ends by gently hitting with a mallet until the gasket is com- pletely seated in place (see figure 5 for proper gasket placement).

Fig. 6

NOTE: The gasket may appear too large, but if it is installed as indicated above it will slip into place.

V. d - CLEANING THE EXTERIOR:

Exterior stainless steel should be cleaned with warm water, mild soap and a soft cloth. Apply with a damp- ened cloth and wipe in the direction of the metal grain.

Avoid the use of strong detergents and gritty, abra- sive cleaners as they may tend to mar and scratch the surface. Do NOT use cleansers containing chlorine, this may promote corrosion of the stainless steel.

Care should also be taken to avoid splashing the unit with water, containing chlorinated cleansers, when mopping the floor around the unit.

For stubborn odor spills, use baking soda and water (mixed to a 1 TBSP baking soda to 1 pint water ratio).

V. e - CLEANING THE INTERIOR:

For cleaning both stainless steel and anodized alumi- num interiors, the use of baking soda as described in section “V. d” is recommended. Use on breaker strips as well as door gaskets. All interior fittings are re- movable without tools to facilitate cleaning.

VI. OTHER

VI. a - SERVICE INFORMATION:

Before calling for service, please check the following:

Is the electrical cord plugged in?

Is the fuse OK or circuit breaker on?

Is the power switch “ON”?

If after checking the above items and the unit is still not operating properly, please contact an authorized Traulsen service agent. A complete list of authorized service agents was provided along with your Traulsen unit. If you cannot locate this, you may also obtain the name of a service agent from the Tech Service page of our website: www.traulsen.com.

If service is not satisfactory, please contact our in- house service department at:

Traulsen

4401 Blue Mound Road Fort Worth, TX 76106 (800) 825-8220

Traulsen reserves the right to change specifications or discontinue models without notice.

VI. b - SPARE PARTS:

Spare or replacement parts may be obtained through a parts supplier or one of our authorized service agents. A complete list of authorized service agents accompanies this manual and is also posted on our company’s official website @ www.traulsen.com.

VI. c - WARRANTY REGISTRATION:

For your convenience, the warranties on your new Traulsen unit may be registered with us by one of two methods. Completing the enclosed warranty card (shipped with the unit), or by filling out the on-line warranty registration form located on the Technical Service page of our website (www.traulsen.com).

-5-

RET132EUT-HHS, RET232EUT-HHS, RET132EUT-FHS, RET232EUT-FHS, RET232NUT-FHS, RET232NUT-HHS specifications

Traulsen is a renowned manufacturer of commercial refrigeration equipment, and their RET232NUT-FHS, RET232NUT-HHS, RET232EUT-FHS, RET132EUT-FHS, RET232EUT-HHS, and RET132EUT-HHS models stand out for their reliability, innovative technology, and overall performance.

The RET232NUT-FHS and RET232NUT-HHS are designed primarily for heavy-duty kitchen environments, featuring a robust stainless steel exterior for durability and easy cleaning. These models offer excellent temperature control, ensuring food safety and quality. The electronic control system allows for precise temperature adjustments and monitoring, helping to maintain ideal conditions for stored items.

One of the primary characteristics of the RET series is its high-efficiency refrigeration system. These models utilize environmentally friendly refrigerants that comply with industry regulations, balancing performance with sustainability. Rapid pull-down capabilities are essential in commercial settings, and Traulsen’s units are equipped with powerful compressors that ensure quick temperature recovery, even in the busiest kitchens.

The RET232EUT-FHS and RET132EUT-FHS models also bring similar features to the table, but with additional advancements in user experience. They have integrated LED lighting, which not only enhances visibility inside the unit but also minimizes energy consumption. This is an important factor for establishments looking to reduce their operational costs while maintaining high standards of service.

In terms of versatility, the RET232EUT-HHS and RET132EUT-HHS models cater to diverse storage needs, featuring adjustable shelving that can accommodate various container sizes and formats. This flexibility is crucial for operators who require customization for different products. The self-closing doors are another valuable feature, ensuring optimal temperature retention while facilitating efficient access.

Safety is paramount in commercial kitchens, and Traulsen’s units incorporate numerous safety features, including integrated door locks and alarms to warn of temperature fluctuations or other operational issues. Furthermore, these refrigerators are designed for easy maintenance, with removable gaskets and access to components, allowing service technicians to perform routine checks efficiently.

Overall, the Traulsen RET series embodies a commitment to quality, performance, and innovation. With features that prioritize energy efficiency, user-friendliness, and safety, these refrigeration units are ideal for any kitchen looking to enhance productivity and ensure food safety. Whether it’s the RET232NUT-FHS or the RET132EUT-HHS, operators can confidently rely on Traulsen’s expertise in commercial refrigeration technology.