True Manufacturing Company GDIM-49, GDIM-26NT Startup, Recommendation, Replacement Parts

Page 12

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

STARTUP

Step 6

A.The compressor is ready to operate. Plug in the cooler.

B.Temperature control set at No. 4 position gives freezers an approximate temperature of 20°F - 25°F. Allow unit to function several hours, completely cooling cabinet before changing the control setting.

C.Excessive tampering with the control could lead to service difficulties. Should it ever become necessary to replace temperature control, be sure it is ordered from your True dealer or recommended service agent.

D.Good air flow in your True unit is critical. Be careful to load product so that it neither presses against the back wall, nor comes within four inches of the evaporator housing. Refrigerated air off the coil must circulate down the back wall.

NOTE

If the unit is disconnected or shut off, wait five minutes before starting again.

RECOMMENDATION

Before loading product we recommend you run your True unit empty for two to three days. This allows you to be sure electrical wiring and installation are correct and no shipping damage has occurred. Remember, our factory warranty does not cover product loss!

REPLACEMENT PARTS

TRUE maintains a record of the cabinet serial number for your cooler. If at any time during the life of your cooler, a part is needed, you may obtain this part by furnishing the model number and serial number to the company from whom you purchased the cooler. Call Toll-Free: (800)- 424-TRUE (Direct to Parts Department). (800)- 325-6152 (U.S.A. & Canada only) or call: (636)- 240-2400.

LIGHT SWITCH LOCATION:

GDIM models will have the light switch located on the right side on the ceiling inside the unit. Most instances the switch is located next to the temperature control.

10

www.truemfg.com

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Table of Contents True Food Service Equipment, Inc Safety Precautions Safety Information Proper Disposal of the Refrigerator USE of Extension CordsBefore You Throw Away Your Old Refrigerator or Freezer Refrigerant DisposalHOW to Connect Electricity Installation / Operation Instructions Ownership Required ToolsUncrating Installation of Legs and Castors LocatingSecuring Castors and Legs Unit levelingWarranty is void if ventilation is insufficient LevelingConductors and Circuits Electrical Instructions Sealing Cabinet to FloorPosition Cabinet Level CabinetReplacement Parts Light Switch LocationStartup RecommendationOperation Grasslin Timer Freezers Defrost Time ClockIf the Compressor will Not RUN Starts but TripsRepeatedly on Overload ProtectorCabinetTemperature Control DefrostTime ClockDefrost Control OnThe Evaporator Drain Pan Coil Defrost HeaterMAINTENANCE, Care & Cleaning Cleaning the Condenser Coil Required ToolsDisconnect the electrical power to the unit Remove the louvered grillStainless Steel Equipment Care and Cleaning Light Bulb Replacement IDL Integrated Door LightingTrue Food Service Equipment, Inc

GDIM-26, GDIM-26NT, GDIM-49 specifications

True Manufacturing Company is renowned for its commitment to producing high-quality refrigeration equipment, catering to a variety of sectors, including food service and beverage industries. Among its diverse product lineup, the True GDIM-49, GDIM-26NT, and GDIM-26 models stand out for their innovative features, advanced technologies, and exceptional performance.

The True GDIM-49 is designed for high-volume businesses, offering an impressive amount of storage space with a capacity of 49 cubic feet. This unit is equipped with energy-efficient, heavy-duty compressors that maintain optimal temperatures, ensuring food safety and freshness. The exterior is constructed from durable stainless steel, providing significant resistance to corrosion and wear, while the interior includes a bright LED lighting system that enhances visibility and improves accessibility to stored items. Additionally, the GDIM-49 features a self-closing door design to prevent unnecessary energy loss.

In contrast, the True GDIM-26NT is tailored for establishments with moderate storage requirements. This model maintains a 26 cubic foot capacity while still embodying the same high standards of quality as its larger counterpart. The GDIM-26NT incorporates advanced refrigeration technology and energy-efficient components, guaranteeing consistent temperature control. One of its standout characteristics is the use of a no-frost evaporator, eliminating the need for manual defrosting and ensuring ease of maintenance over time. The model also features adjustable shelving, allowing users to customize their storage solutions as needed.

Lastly, the True GDIM-26 is similar in size and functionality to the GDIM-26NT but comes without the no-frost feature. This model is perfect for establishments looking for dependable refrigeration without the additional technology, making it a more budget-friendly option. The durable construction and efficient cooling systems in both models guarantee that products remain at optimal temperatures, crucial for food safety.

In summary, True Manufacturing Company’s GDIM-49, GDIM-26NT, and GDIM-26 models represent a fusion of style, functionality, and innovative technology. Businesses can rely on these units for their performance and reliability, confirming True's reputation as a leader in commercial refrigeration. Each model is designed to meet the specific needs of different establishments while maintaining True's hallmark commitment to quality and durability.
Top Page Image Contents