|
| Noises | 21 |
6. | Unscrew the lower hinge (C1). Move the |
|
|
| pin to the opposite side (C2). Unscrew | C3 |
|
| and move the pedal to the opposite side |
| |
| (C3). | C2 |
|
| Screw on the lower hinge on the oppo- |
|
|
| site side. |
|
|
7. | Tighten the pin with the adjustment |
|
|
| spanner supplied. |
| C1 |
8. | Install the handle on the opposite side. |
| |
9. | Raise the appliance and install the ven- |
|
|
| tilation grille. |
|
|
10. | Put the cabinet in position. |
|
|
WARNING!
Reposition, level the appliance, wait for at least four hours and then connect it to the pow- er socket.
Do a final check to make sure that:
•All screws are tightened.
•The magnetic seal adheres to the cabinet.
•The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket.
NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
OK
SSSRRR!
HISSS!
BLUBB!
CLICK! BRRR!