6Control panel
7Minute Minder function
8Humidity function
Switching on
To switch on the appliance do these steps:
1.Connect the mains plug to the power socket.
2.Press the ON/OFF button if the display is off.
3.If "dEMo" appears on the display, the appliance is in demonstration mode. Refer to "What to do if..." paragraph.
4.The temperature indicators show the set default temperature.
To select a different set temperature refer to "Temperature regulation".
If the door remains open for some minutes, the light will turn off automatically. The light is reset by closing and opening the door itself.
Switching off
To switch off the appliance do these steps:
1.Press the ON/OFF button for few seconds.
2.The display switches off.
3.To disconnect the appliance from the power disconnect the mains plug from the pow- er socket.
Temperature regulation
The set temperature of the fridge may be adjusted by pressing the temperature button. Set default temperature:
• +5°C for the fridge
The temperature indicator shows the set temperature. The set temperature will be reached within 24 hours.
After a power failure the set temperature remains stored.
Minute Minder function
The Minute Minder function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down a mixture for a certain lenght of time.
To switch on the function:
1.Press the Mode button until the corresponding icon appears. The Minute Minder indicator flashes.
The Timer shows the set value (30 minutes) for a few seconds.
2.Press the Temperature colder or the Temperature warmer button to change the Timer set value from 1 to 90 minutes.
3.Press the OK button to confirm.
The Minute Minder indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Minute Minder indicator flashes and an audible alarm sounds: