20Installation
3.Insert the filter in the slot found in the back of the air lever flap.
4.Close the air lever flap.
The filter should be handled carefully so fragments do not loosen from the surface. Make sure that the air lever flap is closed to obtain proper function.
Door reversibility
To change the opening direction of the door, do these steps:
1.Remove the plug from the power.
2.Remove the ventilation grille. Remove the upper filling and install it on the opposite side of the grille.
Remove the pedal hole cover and install the cover provided in the accessory bag on the opposite side.
3.Lay down the appliance back side down on a wooden support.
4. Remove the handle: | a1 | a2 |
Unscrew the handle from the top (A1) |
|
|
and the bottom (A2) of the door. |
|
|
Unscrew both of the handle brackets |
|
|
from the handle rod and |
|
|
handle brackets provided in the handle |
|
|
kit. |
|
|
5.Unscrew the hinge (B1) and remove the cover plate (B2) and the support (B3).
Remove the cover (B4) on the opposite side and install the support (B3) the cover plate (B2) and the hinge (B1). In- stall the cover (B4) on the opposite side.
B1 | B2 |
B3 | B4 |