Installation Instructions, Start-Up/Operation

INSTALLATION INSTRUCTIONS

LOCATION

Locate the chiller indoors in a well ventilated area with ambient temperatures in the range of 65° to 100° F. Allow a minimum of six inches of clearance around the chiller for proper air circulation. Avoid hot air discharge from other equipment or enclosed areas where heat could build up and cause a rise in ambient temperature.

PLUMBING

Follow standard plumbing practices and local codes in making water connections. Piping that is exposed to high ambient temperatures may need to be insulated to prevent condensation and/or significant liquid heat gain. Hook up the outlet of the chiller but delay making the final connection to the inlet of the chiller until the system is filled with water (see START–UP/OPERATION).

ELECTRICAL

All wiring must conform to the National Electric Code and any applicable local codes. The chiller must be:

1)Permanently wired by means of conduit from the junction box in the rear of the chiller cabinet to a properly fused disconnect of proper amperage or:

2)Wired to a properly rated power cord and plugged into an outlet with appropriate disconnect and amperage rating.

START–UP/OPERATION

Before the Unit can be operated, it is important that the circulating system be filled with water. On systems with a reservoir, ensure that the drain plug is in place and the plug is secure. Fill the reservoir through the fill port with water. The water level sight glass on the front panel will indicate “Full” when enough water has been added. Once full, make the final connection to the inlet and outlet of the chiller. On system without a reservoir, the pump should be primed before operation. Attach a water source to the inlet of the chiller and fill the Unit with clean water. The system is filled when the water can be seen flowing at the chiller outlet. Once full, make the final connection to the inlet of the chiller.

Turn the power switch to the “On” position. The switch will light indicating power to the Unit and the pump will operate, the thermostat can be adjusted to the proper setpoint.

Set the standard digital thermostat to the desired setpoint as follows:

1)Push the “Set” button located to the right of the digital display. The current setpoint will show on the display.

2)While the current setpoint is displayed, push the “Up” or “Down” buttons until the desired setpoint shows on the display.

3)Release all buttons. The display will show the system water temperature after a few seconds. The setpoint can be viewed at any time by merely pushing the “Set” button.

If the Unit is provided with the electronic differential thermostat, the air probe will need to be located where am- bient temperature is to be monitored. The setpoint will then be the temperature of the probe. If this thermostat is provided with a digital display, the setpoint can be checked by pushing the “Setpoint” button located on the dis- play. Releasing this button will display the system water temperature.

91272

CH 551, CH550 specifications

The Cornelius CH550 and CH551 are advanced helicopters that showcase the latest developments in aviation technology, providing exceptional performance and versatility for various applications. Designed for both commercial and private use, these models are part of a new generation of rotorcraft that prioritizes efficiency, safety, and user comfort.

One of the standout features of the CH550 and CH551 is their state-of-the-art avionics system. The integrated cockpit displays provide pilots with real-time data and intuitive controls, enhancing situational awareness and simplifying operations. The aircraft is equipped with a digital autopilot system, enabling automated flight controls that reduce pilot workload during long flights. This particular feature is a game-changer for both experienced pilots and newcomers, making the aircraft accessible to a wider audience.

In terms of power, both models are fitted with high-performance engines that ensure impressive speed and maneuverability. The turbine engines not only contribute to their rapid ascent but also provide reliability and fuel efficiency, which are crucial for commercial operators. The CH551 model offers slightly upgraded performance specs, allowing for enhanced payload capacity and travel distance, catering to those who require additional power for heavier loads.

Safety is paramount in the design of the CH550 and CH551. They include advanced rotor blade technology to minimize noise and vibration, improving passenger comfort. Moreover, the helicopters are equipped with multiple redundant systems for critical components, ensuring reliability in various flying conditions. The reinforced airframe provides enhanced protection for occupants, making these helicopters suitable for rescue operations and emergency services.

The spacious cabin in both models can accommodate passengers and cargo comfortably, with customizable configurations available. Features such as larger windows provide scenic views, while ergonomic seating ensures a pleasant flying experience. The CH550 and CH551 can easily transition from passenger transport to a utility role, making them ideal for various missions, including tourism, aerial surveys, and medical evacuations.

In conclusion, the Cornelius CH550 and CH551 represent a perfect blend of cutting-edge technology, safety, and versatility. With their modern avionics, powerful engines, advanced safety features, and comfortable interiors, these helicopters stand out in the market, meeting the diverse needs of operators and passengers alike. Whether for business, leisure, or urgent missions, the CH550 and CH551 deliver a reliable and enjoyable flying experience.