Audiovox AV-428V manual Operating Instructions

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

							27, 28
29	19		24	20		BEHIND PANEL			22	23	21	30	15
													14
3													25
4
5					AV-428			Auto Reverse
													11
6
													12
7
													34
													35
													26
	2	1	13	31	36	37	38	32	33	8, 10	18	17	9
							16

6

1ON-OFF POWER BUTTON

Press this button to turn the unit on and off when the ignition switch is on. When the unit is off, the Liquid Crystal Display (LCD) panel will normally display the time-of-day. If the radio is off when the ignition switch is turned off, the POWER button must be pressed to turn on the radio after the ignition switch is turned on. If the ignition switch is turned off while the radio is on, the radio will display the time of day, and will come on automatically when the ignition switch is again turned on.

2VOLUME LEVEL CONTROL

To increase the volume level, rotate the PUSH SELECT- VOL control clockwise (CW). The volume will increase and the level will be shown on the display panel from a minimum of 00 to a maximum of 100. To decrease the volume level, rotate the PUSH SELECT control counter- clockwise (CCW). The volume will decrease as shown on the display panel. This control also includes the Select button 3 for adjustment of the bass, treble,

balance and fader levels as described in 4, 5, 6, and

7.

3SELECT BUTTON (SEL)

This button is used to select the audio function (bass, treble, balance, or fade) to be adjusted using the Volume Level control 2. Pressing the Select button once will set the unit for volume adjustment (VOL will appear on the display panel). Pressing the button additional times will select bass adjustment (BAS on display), treble (TRB), balance (BAL), or fader (FAD). The display will

automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

4BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the PUSH SELECT button 3 so the BAS indication appears on the display panel. Within 5 seconds of choosing the Bass mode, rotate the Volume Level control 2 CCW or CW to adjust the bass response as desired. The level will be shown on the display panel from a minimum --10to a maximum of 10 (00 indicates flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

NOTE: If the BAS or TRE functions are set while the Equalizer function (EQ) is active, the Equalizer function will automatically revert to the FLAT setting.

5TREBLE CONTROL

To adjust the treble level, first select the Treble mode by pressing the PUSH SELECT button 3 so the TRB indication appears on the display panel. Within 5 seconds of choosing the Treble mode, roatate the Volume Level control 2 CCW or CW to adjust the treble response as desired. The level will be shown on the display panel from a minimum of --10to a maximum of 10 (00 indicates flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

128-6634

6 of 16