CD CHANGER CONTROLS
Built into this radio are controls to operate an optional CD changer. Please check with your Rampage/Audiovox car stereo specialist for recommendations of the models that will work with this radio.
Once the changer is installed and properly connected, it may be necessary to press the RESET button behind the radio front panel to initialize the complete installation.
Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio play. The following controls will operate the CD changer when it is installed and connected to this radio. Refer to the owner’s manual included with the CD changer for instructions on the installation and correct loading and use of the CD magazine.
dm CD CHANGER PAUSE/PLAY SELECTOR ( PAU ) During radio, or tape play, press the MODE button to select operation of the CD changer as shown by CDC on the display. Disc play will begin, the disc and track number will be shown on the display panel, and the
center of the disc icon ( 
) will become animated. If
a new magazine has been loaded into the changer, play will begin from the first track of the first disc in the magazine. If a magazine was already in the changer, play will resume from the track on the disc previously in play. During CD changer play, pressing the PAU button once will stop changer play; PAUSE will appear on the display and the center of the disc icon will remain stationary. To resume disc play, press the PAU button again and disc play will resume from the point at which it was interrupted.
dn & do DISC SELECT (DN & UP)
These buttons are used to select the desired disc for play. To advance to a higher number disc, press the UP button do. To return to a lower number disc, press the DN button dn. The number of the disc in play will be shown on the display panel.
dp TRACK SELECT ( 
/ 
)
This button is used to quickly select the beginning of a particular track. With each momentary press of the Forward
Track Select button ( 
), the next higher track number will be selected as shown on the display panel. Similarly, with each momentary press of the Backward Track Select
button (
), the next lower track number will be selected.
dq FOWARD/REVERSE SEARCH (CUE/REVIEW)
and hold the forward (cue) button ( 
) to advance rapidly in the forward direction, or press and hold the
reverse (review) button ( 
) to advance rapidly in the reverse (backward) direction. In either case, the center of the disc icon will rotate faster when search is active.
dr TRACK SCAN SELECTOR (SCN)
When the SCN button is momentarily pressed, the SCN indication will appear on the display panel, and the first 10 seconds of each track on the disc will be played in order. When a desired track is reached, press the SCN button again and play of the selected track will continue (SCN will disappear from the display panel). The Track Scan mode will also be canceled by activating any other disc function (Track Select, Repeat or Random).
When the SCN button is pressed and held for more than 2 seconds, the disc scan mode is activated; DSN will appear on the display and the first 10 seconds of the first track on each disc will be played in disc order. This mode is canceled in the same manner as before.
ds TRACK REPEAT PLAY SELECTOR (RPT)
When the RPT button is momentarily pressed, the RPT indication will appear on the display panel and play of the current track will be continually repeated until the Track Repeat mode is canceled by pressing the RPT button again or by activating the Track Select, Random Play or Scan functions.
When the RPT button is pressed and held for more than 2 seconds, the disc repeat mode is activated; DRT will appear on the display and the play of the current disc will be continuously repeated. This mode is canceled in the same manner as before.
dtSHUFFLE PLAY SELECTOR (SHF)
When the SHF button is momentarily pressed, the SHF indication will appear on the display panel and the tracks on the disc will be played in a random, shuffled order. The Track Select buttons dp will also select tracks in the shuffled order instead of the normal progression. The Track Shuffle mode can be canceled by pressing the SHF button again or by activating the Track Select, Repeat Play or Scan functions.
When the SHF button is pressed and held for more than 2 seconds, the disc shuffle mode is activated; DSF will appear on the display and the play of the discs in the magazine will be played in a random shuffled order. This mode is canceled in the same manner as before.
CD CHANGER CONTROLS
10
13 of 16