CaringForYourRange
Burn or Electrical Shock Hazard
Make sure all controls are OFF and the range is COOL before cleaning. Fallure to do so can result in burns or electrical
shock.
A
Controlpanelandknobs
1. Pull control knobs and command buttons straight off.
2. Use warm soapy water and a soft cloth, or spray glass cleaner, to wipe the control panel. Rinse and wipe dry.
3. Wash control knobs and command buttons in warm soapy water. Rinse well and dry. Do not soak.
4. Push control knobs and command buttons straight back on. Make sure control knobs point to OFF. Make sure buttons have not turned oven ON. If oven has been turned on, push Oven Off button.
Surfaceunitsand reflectorbowls
Removing
1. Lift the edge of the unit opposite the receptacle, just enough to clear the element hold down clip, reflector bowl and trim ring.
2. Pull the surface unit straight away from the receptacle.
17