Whirlpool SF195LEK manual Sequence Programming, To Program the First Step of the Sequence

Page 14

Sequence Programming

(on some models)

Sequence Programming allows you to program at one time up to four cook functions, and can be used at the same time with other oven functions, such as the Timer and Warming Drawer.

Sequence Programming takes precedence over any non- sequenced cook function. For example, if an un-timed Bake function is in process and a sequence program is started, the un-timed Bake function will be canceled, and the program sequence will start.

All steps of a sequenced program, except for the last step, must be programmed with a stop time. If a stop time is not entered for a step in the sequence program, and the FIRST/NEXT STEP pad is pressed, three tones will sound.

To Program the First Step of the Sequence:

1.Press FIRST/NEXT STEP.

“PROGRAM” and “STEP” will appear on the display. A flashing “1” will also appear on the display, indicating that step 1 is being programmed.

2.Choose the desired cook function by pressing any cook function key.

Press TEMP "up" or "down" arrow pad (if desired) to select temperature.

3.Press START TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to begin.

If START TIME is not pressed, then the sequence of cook functions will begin immediately once programming is complete and START is pressed.

The display will show either the time of day (if start time was not programmed) or the start time (if same was programmed), but with a flashing colon. “Stop” and “Time” will also appear on the display.

4.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to set the time of day for the first cook function to stop.

To Program Next Steps of the Sequence:

1.Press FIRST/NEXT STEP.

“PROGRAM” and “STEP” will appear on the display. The number of the steps being programmed will flash.

“START” and “TIME will appear on the display.

2.Choose the desired cook function by pressing any cook function key.

Press TEMP “up” or “down” arrow pad (if desired) to select temperature.

3.Press STOP TIME, then HR and MIN “up” or “down” arrow pads to select stop time.

4.Press START to begin sequence.

5.Press OFF/CANCEL at any time to clear program and to stop program.

To Review/Modify Programmed Sequence:

If program steps are partially or completely programmed, yet the sequence has not been started, the programmed cook functions can be reviewed.

1.Press REVIEW STEPS. Step 1 will appear in the display

Subsequent presses of REVIEW STEPS will cause display of programmed steps in order.

“STEP” and “RECALL” will appear on the display. The number of the displayed step will flash. A recalled step will remain lit on the display for 5 minutes if no further action is taken.

2.If fewer than four steps have been programmed, press REVIEW STEPS repeatedly until the last programmed step is displayed, then press FIRST/NEXT STEP if it is desired to program an additional step.

While a step is recalled, a cook function pad can be used to change the function, or the TEMPERATURE “up” or “down” arrow pad can be used to change the set temperature.

START TIME, when used with the HR or MIN “up” or “down” arrow pads, can be used to change, add or delete a delayed start.

STOP TIME can be used to change the stop time. Changing the stop time of a step will automatically change the start times and stop times of all subsequent programmed cook functions.

3.After Review/Modification of the programmed sequence is complete, press START to begin sequence.

To Modify Sequence Programming:

1.Press UNDO.

The last step of the sequence will be cancelled, and the step prior to the cancelled sequence will show on the display for either review or modification.

If the programmed sequence has not been started, see "To Program Next Steps of the Sequence" section to program a step to replace the cancelled cook function.

2.Press START.

The first step will show on the display and the program sequence will begin.

Changes can be made to the STOP TIME during a programmed cook function; however, changes cannot be made after a programmed cook function has been completed.

If at any time during an active sequenced program FIRST/ NEXT STEP is pressed, three tones will sound.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents GAS Range Use & Care GuideTable of Contents Range Safety Your safety and the safety of others are very importantImportant Safety Instructions Anti-Tip BracketRange Parts and FeaturesControl Panel Surface Burners Cooktop USECooktop Controls To SetHomeCanning To CleanCookware Characteristics CookwareElectronic Oven Control To Adjust Oven Temperature Calibration TimerOven TemperatureControl Fahrenheit and CelsiusPositioning Racks and Bakeware Oven USEAluminum Foil Split Oven RackBaking and Roasting BakewareOven Vent Meat ThermometerTo Use Choice Bake FunctionBroiling RackWarm Hold Feature Timed CookingTo Program Next Steps of the Sequence Sequence ProgrammingTo Program the First Step of the Sequence To Review/Modify Programmed SequenceWarming Drawer Warming Drawer SettingsWarming Drawer Temperature Chart Self-Cleaning Cycle Range CareGeneral Cleaning Storage Drawer Oven LightOven Door Is the proper temperature set? TroubleshootingCooling fan runs during baking, broiling or cleaning Is the burner damaged?U.S.A CanadaWhirlpool Corporation will not pay for Full ONE-YEAR WarrantyFIVE-YEAR Limited Warranty 8522778A

SF195LEK specifications

The Whirlpool SF195LEK stands as a noteworthy contender in the realm of chest freezers, offering a blend of functionality, efficiency, and innovative features designed to meet diverse freezing needs. With a capacity of 19.2 cubic feet, this model caters to households that require ample storage space for frozen goods, making it an ideal choice for families, bulk shoppers, or those looking to store seasonal produce.

One of the standout features of the Whirlpool SF195LEK is its Energy Star certification, which signifies that it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only reduces the carbon footprint but also translates into cost savings on utility bills over time. Consumers can enjoy the peace of mind that comes with knowing they are making an environmentally conscious choice.

The freezer is designed with a manual defrost system, allowing users to manage ice buildup effectively. This can enhance the unit's overall performance and longevity, ensuring that it continues to operate efficiently throughout the years. A removable storage basket is included, providing convenient access to smaller items without disrupting the organization of larger items stored below. This thoughtful design makes it easier to locate specific items quickly.

The SF195LEK also incorporates a temperature management system with an adjustable dial, giving users the flexibility to set the ideal freezing conditions based on their individual needs. A power-on indicator light informs users when the unit is operating, while a safety door lock provides added security and prevents unauthorized access.

In terms of construction, the Whirlpool SF195LEK features a robust and durable design, ensuring stability and reliability. The exterior finish is easy to clean, which helps maintain a neat appearance in any space. The lid opens wide for easy access and has a heavy-duty hinge that allows it to stay open at any angle, facilitating effortless loading and unloading.

In summary, the Whirlpool SF195LEK chest freezer is an excellent choice for those seeking a reliable, spacious, and energy-efficient freezing solution. With its thoughtful features, user-friendly design, and robust construction, it effectively addresses the storage needs of modern households while maintaining an emphasis on energy efficiency and convenience. Whether stocking up for the winter or simply organizing favorite foods, this freezer is engineered to deliver long-lasting performance and value.
Top Page Image Contents