UsingYourRange
Usingthe surfaceburners
Control knob0 must be pushed Irr, then turned to the LITE fxuiitii. The cliiing riourKl is the ignition sparking.
To stop the clicking sound after the burner liits. turn the aontrol knob bedc to a desired setting. The control knob can be set anywhere between HI and OfF.
Surface burner rnarksm
The solid dot in the surface burner marker shows which surfaca burner is turned on by that knob.
Unlll you get uti to the ssttlng% w the followhg as a gufde. For beat resutts. start cooking at the high settings; then turn the control knob down to continue cooking.
Upe UlE to light the burner. Aft&v the burner lights, turn control back to a desired setting to stop the clicking of the ignttii.
Uw HI to start foods cooking: to bring liquids to a boil.
Use a rnedlum setting to continue cooking or to fry chiien or pancakes; for gravy, pudding and icing; to cook large amounts of vegetables.
Uee a low setilng to keep food warm until ready to serve.
NOTE: Do not cook with the axltrol in the LITE position.
In cast3 of a prolonged power failure:
Surface burners can tx manually lighted. Hold a lighted match near a burner and turn the control to the LITE position. After the burner lights. turn the control to the desired setting.
Burn, Fire and Explosion Hazsrd
l Burner flame should not extend ayond the edge of the caoklng utensil. The flame can burn you and cause poor cooklng results.
. Be sure all control knoba are turned to OFF when you are not cookhg. Someone oould be burned or a flrr could start If a burner Is accidentally left ON.
l If the flame should go out while cooklng, or If there Is a sfrong gas odor, turn ths burners OFF. Walt five mlnutss for the gas odor to dfsappsar, before rellghtlng burner. If gas odor la still prewnt, sss safety note on page 3. Failure to follow thess precautions could reauff In exploskn or flre.
l Do not attempt to light the oven burner durlng a power failure. personal injury could result.