Electrical Requirements U.S.A. Only | Whirlpool W10403811C manual

Electrical Requirements - U.S.A. Only

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and wire gauge are in accordance with local codes.

Do not use an extension cord.

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/ NFPA 70-latest edition and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association

1 Batterymarch Park

Quincy, MA 02169-7471

WARNING: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded. Do not modify the power supply cord plug. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Electrical Connection

To properly install your range, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

■Range must be connected to the proper electrical voltage and frequency as specified on the model/serial rating plate. The model/serial rating plate is located on the frame behind a top corner of the door or either side of the drawer. Refer to the figures in “Product Dimensions” in the “Location Requirements” section.

■This range is manufactured with the neutral terminal connected to the cabinet. Use a 3-wire, UL listed, 40- or

50-amp power supply cord (pigtail) (see the following Range Rating chart). If local codes do not permit ground through the neutral, use a 4-wire power supply cord rated at 250 volts, 40 or 50 amps and investigated for use with ranges.

Range Rating*		Specified Rating of
		Power Supply Cord Kit
		and Circuit Protection

120/240 Volts	120/208 Volts	Amps

8.8 - 16.5 KW	7.8 - 12.5 KW	40 or 50**
16.6 - 22.5 KW	12.6 - 18.5 KW	50

*The NEC calculated load is less than the total connected load listed on the model/serial rating plate.

**If connecting to a 50-amp circuit, use a 50-amp rated cord with kit. For 50-amp rated cord kits, use kits that specify use with a nominal 1³⁄₈" (34.9 mm) diameter connection opening.

■A circuit breaker is recommended.

■The range can be connected directly to the circuit breaker box (or fused disconnect) through flexible or nonmetallic sheathed, copper or aluminum cable. See the “Electrical Connection - U.S.A. Only” section.

■Allow 2 to 3 ft (61.0 cm to 91.4 cm) of slack in the line so that the range can be moved if servicing is ever necessary.

■A UL listed conduit connector must be provided at each end of the power supply cable (at the range and at the junction box).

■Wire sizes and connections must conform with the rating of the range.

■The wiring diagram is located on the Tech Sheet.

■The Tech Sheet is located on the back of the range inside a clear plastic bag.

If connecting to a 4-wire system:

This range is manufactured with the ground connected to the neutral by a link. The ground must be revised so the green ground wire of the 4-wire power supply cord is connected to the cabinet. See “Electrical Connection - U.S.A. Only” section.

Grounding through the neutral conductor is prohibited for new branch-circuit installations (1996 NEC); mobile homes; and recreational vehicles, or an area where local codes prohibit grounding through the neutral conductor.

When a 4-wire receptacle of NEMA Type 14-50R is used, a matching UL listed, 4-wire, 250-volt, 40- or 50-amp, range power supply cord (pigtail) must be used. This cord contains 4 copper conductors with ring terminals or open-end spade terminals with upturned ends, terminating in a NEMA Type 14-50P plug on the supply end.

The fourth (grounding) conductor must be identified by a green or green/yellow cover and the neutral conductor by a white cover. Cord should be Type SRD or SRDT with a UL listed strain relief and be at least 4 ft (1.22 m) long.

4-wire receptacle (14-50R)

The minimum conductor sized for the copper 4-wire power cord are:

40-amp circuit

2 No.-8 conductors

1 No.-10 white neutral

1 No.-8 green grounding

If connecting to a 3-wire system:

Local codes may permit the use of a UL listed, 3-wire, 250-volt, 40- or 50-amp range power supply cord (pigtail). This cord contains 3 copper conductors with ring terminals or open-end spade terminals with upturned ends, terminating in a NEMA Type 10-50P plug on the supply end. Connectors on the appliance end must be provided at the point the power supply cord enters the appliance. This uses a 3-wire receptacle of NEMA Type 10-50R.

3-wire receptacle (10-50R)

W10403811C specifications

The Whirlpool W10403811C is a versatile and essential component for modern kitchens, serving as a range hood that enhances both functionality and aesthetic appeal. This powerful appliance is designed to improve ventilation, ensuring a clean and comfortable cooking environment by efficiently removing smoke, grease, and odors from the air.

One of the standout features of the W10403811C is its robust motor, which offers multiple fan speeds. This flexibility allows users to adjust the airflow based on their cooking needs, whether they’re simmering a delicate sauce or searing meats. The strong performance minimizes the accumulation of cooking residues on surfaces, making it easier to maintain a clean kitchen.

The design of the W10403811C is not only stylish but also practical. Its sleek stainless steel finish complements a variety of kitchen decors, providing a modern look that many homeowners desire. Additionally, the range hood includes integrated LED lighting, which adds brightness to the cooking space while also enhancing visibility when preparing meals. The energy-efficient LED bulbs last longer than traditional bulbs, reducing the need for frequent replacements.

In terms of installation, the W10403811C offers flexibility with both ducted and ductless options, catering to different kitchen layouts and preferences. For ductless installations, the appliance can be equipped with a charcoal filter that effectively recirculates the air, making it suitable for spaces without external ventilation.

Another impressive characteristic of this range hood is its quiet operation. Unlike some models that can be disruptive during cooking, the Whirlpool W10403811C is engineered to minimize noise, allowing for pleasant and uninterrupted cooking and dining experiences. This feature is especially valued in open-plan living areas where the kitchen, dining, and living spaces are interconnected.

Lastly, maintenance of the W10403811C is made easy with its dishwasher-safe filters. Regular cleaning of the filters is crucial for maintaining peak performance and extending the lifespan of the appliance. This user-friendly approach to maintenance empowers homeowners to keep their range hood operating at optimal efficiency without significant effort.

Overall, the Whirlpool W10403811C excels in delivering essential features, advanced technology, and thoughtful design, making it a valuable addition to any modern kitchen. Its combination of efficient ventilation, attractive aesthetics, and ease of use ensures that culinary enthusiasts can create delicious meals in a clean and comfortable environment.