Whirlpool W10403811C installation instructions Verify Anti-Tip Bracket Is Installed Engaged

Page 12

2.Attach terminal lugs to line 2 (red), bare (green) ground, and line 1 (black) wires. Loosen (do not remove) the setscrew on the front of the terminal lug and insert exposed wire end through bottom of terminal lugs. Securely tighten setscrew to torque as shown in the following Bare Wire Torque Specifications chart.

A

B

CD E

A. Terminal lug

B.Setscrew

C.Line 2 (red) wire

D.Bare (green) ground wire

E.Line 1 (black) wire

Bare Wire Torque Specifications

Attaching terminal lugs to the terminal block - 20 lbs-in. (2.3 N-m)

Wire Awg

Torque

8 gauge copper

25 lbs-in. (2.8 N-m)

 

 

6 gauge aluminum

35 lbs-in. (4.0 N-m)

 

 

3.Use ³⁄₈" nut driver to connect the bare (green) ground wire to the center terminal block post with one of the 10–32 hex nuts.

Verify Anti-Tip Bracket Is Installed and

Engaged

On Ranges Equipped with a Storage Drawer:

1.Remove the storage drawer. See “Storage Drawer” section.

2.Use a flashlight to look underneath the bottom of the range.

3.Visually check that the rear range foot is inserted into the slot of the anti-tip bracket.

On Ranges Equipped with a Warming Drawer or Premium Storage Drawer:

1.Place the outside of your foot against the bottom front of the warming drawer or premium storage drawer, and grasp the lower right or left side of the control panel as shown.

NOTE: If your countertop is mounted with a backsplash, it may be necessary to grasp the range higher than is shown in the illustration.

F

A

E

B

 

D

 

C

A. 10–32 hex nut

D. Bare (green) ground wire

B. Line 2 (red)

E. Line 1 (black)

C. Ground-link screw

F. Terminal lug

4.Connect line 2 (red) and line 1 (black) wires to the outer terminal block posts with 10-32 hex nuts.

5.Securely tighten hex nuts.

6.Replace terminal block access cover.

2.Slowly attempt to tilt the range forward.

If you encounter immediate resistance, the range foot is engaged in the anti-tip bracket.

3.If the rear of the range lifts more than ½" (1.3 cm) off the floor without resistance, stop tilting the range and lower it gently back to the floor. The range foot is not engaged in the anti-tip bracket.

IMPORTANT: If there is a snapping or popping sound when lifting the range, the range may not be fully engaged in the bracket. Check to see if there are obstructions keeping the range from sliding to the wall or keeping the range foot from sliding into the bracket. Verify that the bracket is held securely in place by the mounting screws.

4.Slide the range forward, and verify that the anti-tip bracket is securely attached to the floor or wall.

5.Slide range back so the rear range foot is inserted into the slot of the anti-tip bracket.

IMPORTANT: If the back of the range is more than 2" (5.1 cm) from the mounting wall, the rear range foot may not engage the bracket. Slide the range forward and determine if there is an obstruction between the range and the mounting wall. If you need assistance or service, refer to the “Assistance or Service” section of the Use and Care Guide, or the cover or “Warranty” section of the User Instructions, for contact information.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Table of Contents Range Safety Tools and Parts Location RequirementsProduct Dimensions Cabinet Dimensions If connecting to a 4-wire system If connecting to a 3-wire systemElectrical Requirements U.S.A. Only Electrical ConnectionInstall Anti-Tip Bracket Unpack RangeOn Ranges Equipped with a Storage Drawer Floor Mounting Wall MountingPower Supply Cord Direct Wire Style 1 Power supply cord strain reliefElectrical Connection U.S.A. Only Wire connection Power Supply Cord Style 2 Direct wire strain reliefIf your home has You will be Go to Section Connecting to Direct Wire Installation Copper or Aluminum Wire Wire Connection Direct WireBare Wire Torque Specifications Wire Awg TorqueVerify Anti-Tip Bracket Is Installed Engaged Gauge copper Lbs-in .8 N-m Gauge aluminum Lbs-in .0 N-mLevel Range Warming Drawer or Premium StorageTo Remove To ReplaceComplete Installation Storage DrawerOven Door If range does not operate, check the followingFor direct-wired ranges For power supply cord-connected rangesMoving the Range W10403811C

W10403811C specifications

The Whirlpool W10403811C is a versatile and essential component for modern kitchens, serving as a range hood that enhances both functionality and aesthetic appeal. This powerful appliance is designed to improve ventilation, ensuring a clean and comfortable cooking environment by efficiently removing smoke, grease, and odors from the air.

One of the standout features of the W10403811C is its robust motor, which offers multiple fan speeds. This flexibility allows users to adjust the airflow based on their cooking needs, whether they’re simmering a delicate sauce or searing meats. The strong performance minimizes the accumulation of cooking residues on surfaces, making it easier to maintain a clean kitchen.

The design of the W10403811C is not only stylish but also practical. Its sleek stainless steel finish complements a variety of kitchen decors, providing a modern look that many homeowners desire. Additionally, the range hood includes integrated LED lighting, which adds brightness to the cooking space while also enhancing visibility when preparing meals. The energy-efficient LED bulbs last longer than traditional bulbs, reducing the need for frequent replacements.

In terms of installation, the W10403811C offers flexibility with both ducted and ductless options, catering to different kitchen layouts and preferences. For ductless installations, the appliance can be equipped with a charcoal filter that effectively recirculates the air, making it suitable for spaces without external ventilation.

Another impressive characteristic of this range hood is its quiet operation. Unlike some models that can be disruptive during cooking, the Whirlpool W10403811C is engineered to minimize noise, allowing for pleasant and uninterrupted cooking and dining experiences. This feature is especially valued in open-plan living areas where the kitchen, dining, and living spaces are interconnected.

Lastly, maintenance of the W10403811C is made easy with its dishwasher-safe filters. Regular cleaning of the filters is crucial for maintaining peak performance and extending the lifespan of the appliance. This user-friendly approach to maintenance empowers homeowners to keep their range hood operating at optimal efficiency without significant effort.

Overall, the Whirlpool W10403811C excels in delivering essential features, advanced technology, and thoughtful design, making it a valuable addition to any modern kitchen. Its combination of efficient ventilation, attractive aesthetics, and ease of use ensures that culinary enthusiasts can create delicious meals in a clean and comfortable environment.
Top Page Image Contents