Whirlpool SF315PEE Adjustingmeoventemperamecontrol, Adjust by, This Number, To Cook Degrees

ADJUSTINGMEOVENTEMPERAMECONTROL

Although your new oven is properly adjusted to
provide accurate temperatures it may cook faster
or slower than your old oven.
	If you are not satisfied with the baking/roasting
results, you can change the offset temperature by
following			the steps below.
NOTE: DO NOT measure oven temperature with a
thermometer. Opening the oven door will lower the
oven temperature and give you an incorrect reading.
Also, the thermometer temperature reading will
change as your oven cycles.
1. Press and hold the bake pad for 4 seconds.				PRESS
	The display will show 350°F for 4 seconds. Then
	you will see the current offset temperature, for
	example “00,” if you have not already adjusted
	the	temperature.
					(factory		setting	of “0”)
2.	Set	the new offset temperature.		PRESS
	Press the A temp pad to raise the temperature
	or the V temp pad to lower the temperature in
	10°F amounts. You can set the temperature
	change to as low as -30°F or as high as +3O”F.
	A minus (-1sign will appear before the number				(example		when	making
	when decreasing the temperature setting. The
					oven	10°F cooler)
	minus sign shows the oven will be cooler by the
	displayed amount. There is no sign in front of the
	number when increasing the temperature setting.
3.	Enter		the adjustment.	PRESS	YOU SEE
				;	(time of day or minute
	NOTE: The offset temperature resets to “00” if			B
	the	power goes out for more than 1 second.		..	timer	countdown)

Howto deteminethe amountof adjustmentneeded

The chart at the right tells you how much to adjust the offset temperature to get the cooking results you want. You can figure out cooking results by the amount of browning, moistness, and rising times for baked foods.

			ADJUST BY
			THIS NUMBER
TO COOK			OF DEGREES
FOOD ...			(FAHRENHEIT)
A little	more		+lO
Moderately		more	+20
Much	more		+30
A little	less		-10
Moderately		less	-20
Much	less		-30

17