Whirlpool SES374H warranty Setting the Controls, Example shows 41⁄2-hour, Cleaning time

Page 29

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

1.Press AUTO CLEAN.

The clean indicator light will light up. This will automatically set a 31⁄2-hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down 1⁄2 hour before the cycle is over.

PRESS

YOU SEE

AUTO

CLEAN

ON

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time be- tween 21⁄2-41⁄2hours shows on the display.

PRESS

YOU SEE

TIME

ON

•Use 21⁄2 hours for light soil.	(example shows 41⁄2-hour
•Use 31⁄2-41⁄2hours for average to heavy soil.	cleaning time)

3.Start the oven.

The on and heat indicator lights will light up.

NOTES:

•Make sure the door is closed all the way. If the door is open even a little, it will not lock. If the door is closed, it will lock after you press

START/ENTER.

•Do not attempt to open the oven door while locking.

PRESS

YOU SEE

START

ENTER

5 SEC

ON

4.After the Self-Cleaning cycle starts:

The door locked indicator light will light up when the oven door locks.

5. After the Self-Cleaning cycle ends and the oven	YOU SEE
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display.	PRESS

ON

OFF

CANCEL

6.After the oven cools to room temperature, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mildly abrasive cleanser or cleaning sponge.

29

Image 29

Contents 8272366 Self-CleaningPlease record your model’s information On next Range SafetyANTI-TIP Bracket Important Safety Instructions For units with ventilating hood For self-cleaning rangesControl Panel Parts and FeaturesUsing the Surface Cooking Areas Using Your RangeUsing the control knobs Setting Recommended USECookware tips Home canning informationTo protect your range Surface PanCharacteristics of cookware materials Hot surface indicator light Using the ceramic glass cooktopRack placement for specific foods Using the OvenWhen YOU have Place Positioning racks and pansBakeware Choices Using Aluminum FoilDisplay/clock Indicator lights Using the control lockElectronic Oven Control Using the Electronic Minute Timer Setting the ClockPress Clock Example forTo clear the display, turn off the minute timer STARTING/CANCELING a FunctionDisplay counts down Time of dayRear of rack BAKING/ROASTINGRoasting meats and poultry Example for set temperature of 325F Saving energy Factory settingThis Number Adjust byTo Cook Degrees FahrenheitFront of rack Rear of rack BroilingStart the oven Broil indicator light will light upPress Custom Broil Rack Minutes Meat Position Side Broiling guidelinesApproximate Time Cook time indicator light will light up Using the Auto Cooking ControlExample shows bake at 375F Press Cook Time Example shows 10-minute baking/roasting timeDisplay counts down cook time To delay start and stop automaticallyChoose the bake setting Example shows 2 o’clock start time Start time/delay indicator light will light upOven vent Oven VentCeramic glass cooktop model Replacing the storage drawer Storage DrawerRemoving the storage drawer Tips Before you start the Self-Cleaning cycle, make sure youBefore YOU Start Example shows 41⁄2-hour Setting the ControlsCleaning time HOW the Cycle Works To stop the self-cleaning cycle at any timeCaring for Your Range Cleaning ChartCaring for Your Range Cleaning the Ceramic Glass Cooktop To replace Removing the Oven DoorTo remove To replace the oven light Oven LightWhen SELF-CLEANING Your Oven TroubleshootingProblem Cause Range does not WorkDisplay Messages Cooking ResultsConsultants provide assistance with Requesting Assistance or ServiceTopic IndexWhirlpool Corporation will not PAY for WarrantyFull FIVE-YEAR