CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR (CONT.)
2.Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots.
3.Rotate top of door toward range. Slide hinge hangers down onto front frame support pins.
NOTE: Make sure the hinge hangers are fully seated and engaged on the support pins.
4.Insert the door stop clip with the angular surface at the top of the frame hinge slot, then push in the bottom of the clip until flanges are flush with the front frame.
5.Open the door completely and remove the door removal pins. Save door removal pins for future use.
6.Close the door.
Door stop clip
Door removal pin hole
Door removal pin hole
Range
Hinge hanger
Support pins
Front frame hinge slot
Angular surface of door stop clip
THE OVEN LIGHT
To replace the oven light:
1.Unplug range or disconnect power.
2.Remove the glass bulb cover in the back of the oven by turning
it counterclockwise.
3.Remove the light bulb from its socket. Replace the bulb with a
4.Replace the bulb cover by turning it clockwise.
5.Plug in range or reconnect power.
NOTE: The oven light will not work during the
35