Whirlpool RF377PXY important safety instructions Delay

Page 29

If a deaning cycle other than 3 hours is desired, use the Hour and Minute pads to set the desired cleaning time. Push the ‘up’ (A) or ‘down’ (r) pad(s) until a time between 2-4 hours shows in the display.

lUse 2 hours for light soil.

lUse 34 hours for moderate to heavy soil.

Push the StartEnter pad. The Clean Time Indicator Lght will stay on to show that the oven is programmed for the Self-Cleaning cycle.

Skip to Step 6 if you want the SelfCleaning cyde to start now.

4.To delay the start using Stop Time:

Set both the Oven Selector and Oven Tem- perature Control Knob to CLEAN. Push the Stop Time pad. The Clean Time Indicator Light will flash and the Stop Time Indicator Light will light up. Use the Hour and Minute pads to set the desired stop time. Push the YIP’ (A) or “down’(r) pad(s) until the correct time shows in the display. The oven will automatically compute the delay start time by subtracting the set cleaning time from the set stop time.

Push the Start/Enter pad. The display will go back to showing the current time of day. The Delay Indicator LigM will light up and the Clean Time and Stop Time Indicator Lights will flash to indicate that the oven is programmed to start the Self-Cleaning cyde at a later time.

When the start time is reached, the Delay Indicator Light will go off, the Clean Time Indicator Lght will light up (stop flashing) and the oven will start to dean.

5.To delay the start uslng Start Time:

Set both the Oven Selector and Oven Tem- perature Control Knob to CLEAN. Push the Delay Start Time pad. The Clean Time Indicator Light will flash and the Start Time Indicator Light will light up. Use the Hour and Minute pads to set the desired start time. Push the Qp (A) or ‘down’ (r) pad(s) until the correct time shows in the display.

Push the Start/Enter pad. The display will go back to showing the current time of day. The Delay Indicator tigM will light up and the Clean Time and Start Time Indicator Lights will flash to indicate that the oven is programmed to start the Self-Cleaning cyde at a later time.

When the start time is reached, the Delay Indicator Light will go off, the Clean Time Indicator Lght will light up (stop flashing) and the oven will start to dean.

DELAY

DELAY

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents SELF-CLEANING Electric Range Model RF377PXY Thank you for buying a Whirlpool appliance Your safety is important to usGeneral Important Safety InstructionsCiency Foam-type extinguisher Control panel Parts And FeaturesUsing the surface units Using Your RangeSurface heating indicator light This SectionHome canning information Solid element surface unitsCookware tips Pans Positioning racksFor best air circulation Display/clock Using aluminum foil for bakingElectronic oven controls Control knobs Setting the clockCommand pads To cancel the Minute Timer Using the electronic Minute TimerUsing the Off/Cancel pad Put food in the oven Baking/roastingBroiling Adjusting the oven temperature controlCustom broil Broiling tipsEnergy saving tips Using the elbctkotiic Mealtimer controlPage Method Z-Using Stop lime Position the oven ranks properly and put food in the oven Time Time Method 2-Using Start Time and Stop Time Page Method 3-Using Cook Time and Stop Time Page Oven vent Optional door panel pat Storage drawerAnti-tip bracket How Cycle Works Using The SelfCleaning CycleBefore you start ThisSetting the controls Delay Special tips To stop the Self-Cleaning cycle at any timeCaring For Your Range Cleaning the solid element surface unitsQ1. .Q Part What to USE Cleaning other range partsOven light Before calling for assistance If You Need Assistance Or ServiceReset the clock See Call for service. See on If you are not satisfied with Itlet2e problem was If you need serviceIf you need assistance If you need FSP replace- ment partsPage Page Electric Freestanding Range Warranty
Top Page Image Contents