Using | Your | Range |
|
|
| |||||
In This | Section |
|
|
|
|
|
| Page | ||
|
|
|
| Page |
|
|
|
| ||
Using the surface | burners | .7 | Adjusting | the | oven | temperature | ||||
Positioning |
| racks | and pans | .9 | control |
| .13 | |||
| Broiling |
| .14 | |||||||
For best | air | circulation | 10 |
| ||||||
Energy saving | tips. | ......................... .15 | ||||||||
Lighting | standing | pilots | .l 1 | |||||||
The | oven | vent | ................................. | .15 | ||||||
Baking/roasting | .12 |
| ||||||||
The | brackets | ....................... .16 | ||||||||
|
|
|
|
| ||||||
To obtain the best cooking results possible, you must operate your range properly. This section gives you important information for efficient and safe use of your range.
Using the surface burners
Your range is equipped with either standing pilots or electric ignitors. Standing pilots must be lit initially with a match following the directions on page 11. The pilot light will remain lit when the burners are turned off. To turn a burner on again, just push in and turn the control knob to LITE and the burner will light. Electric ignitors automatically light the burners each time the control knob is turned to LITE.
Push in the control knob and turn
counterclockwise to the LITE position. On electric ignitor models, the clicking sound is the ignitor sparking. Visually check that burner has lit.
After the burner lights, turn the control knob to the desired setting. You can set the control knob anywhere between HI and LO.
Surface burner markers
The solid dot in the surface burner marker shows which surface burner is turned on by that knob.
Burner heat settings
Use correct burner heat settings (see next page). If the heat setting is too high, it can: l Char bacon and cause curling.
l Make eggs tough and crisp at the edges. l Toughen liver, fish and seafood.
l Scorch delicate sauces and custards. l Cause a boilover.
Push in and turn counterclockwise