![](/images/new-backgrounds/1081997/8199729x1.webp)
3.Pull the surface unit straight away from the receptacle.
4.Lift out the reflector bowl. See
” Cleaning Chart ” on page 20 for cleaning instructions.
Replacing
2. Line up openings in the reflector
I | bowl with the surface unit recep- | |
tacle and the element hold down | ||
|
3.Hold the surface unit as level as possible with the terminal just started into the receptacle. Push the surface unit terminal into the receptacle.
4.When terminal is pushed into the receptacle as far as it will go, push down the edge of the surface unit opposite the receptacle. The ele- ment hold down clip will keep the surface unit from moving around.
15