Impella Spacing, Breaking Magnetic Lock | Cornelius J15, JT20, JS7

TROUBLE SHOOTING

Jet Spray (Cold) Training Manual

2.NOISE IN PUMP ASSEMBLY

2.1 Impella Spacing

Correct installation and maintenance of the impella is very important to efficient operation and the appearance of the product in the bowl.

2.2 Breaking Magnetic Lock

The operation of the spray drive motor and impella is simple. The two magnets, one on the spray drive motor and one on the impella assembly, “lock” these com- ponents together. When that lock is broken it creates noise and/or an improper pumping action. The alignment of the two components is to correct and efficient operation.

Problems that cause that loss of magnet alignment include:

•Improper product mix

•Worn bearing on the impella unit

•Worn impella pin or shaft

•Bowl assembly not correctly seated on the chassis

•Impella installed upside down

•Pumps not being run, allowing solids to settle in the bottom of the bowl.

Both the pump refrigeration switches should be on whenever product is in the bowl.

3.PINCH TUBE INSTALLATION

1.Remove pinch tubes from the plastic bag and wash with warm and mild deter- gent or soap.

2.Visually check for cuts or holes in the pinch tube assembly.

3.Wet bowl spout surface and sealing rings on the pinch tube.

4.With one hand, push back dispense lever until it touches the front panel. With the other hand, pick up pinch tube and carefully insert tube into bowl spout opening, and into lower handle support spout. Make sure end of tube does not get caught on edge above handle support spout opening.

5.Push pinch tube into bowl spout opening with thumb. When end of tube passes beyond bottom of dispense lever support spout opening, pull end of tube for final seating of pinch tube top into bowl spout seat. Make sure the tube is free of wrinkles. Tube should extend ¼" below support spout.

6.Install other pinch tubes on the unit if needed.

- 13 -

JT30, EJ1, J15, JS7, JT20 specifications

Cornelius has long been a leader in the beverage dispensing industry, with a range of innovative products including the JT20, JS7, J15, EJ1, and JT30 models. Each of these dispensers showcases unique features, advanced technologies, and characteristics that cater to diverse commercial needs.

The Cornelius JT20 is known for its versatility and efficiency. Designed for high-volume applications, this unit offers a 20-flavor capability, making it an excellent choice for restaurants and convenience stores. With advanced cooling technology, the JT20 ensures optimal beverage temperature while minimizing energy consumption. Its user-friendly interface allows for easy calibration and operation, which is crucial during busy service hours.

Next is the JS7, which appeals to those who prioritize simplicity and reliability. This model boasts a compact design, ideal for limited spaces while delivering a robust performance. The JS7 comes equipped with high-quality carbonators that enhance drink taste and consistency. Its straightforward maintenance features ensure that operators can keep it running smoothly without excessive downtime.

The J15 model stands out for its innovative integration of digital technology. Equipped with a smart dispensing system, the J15 allows users to customize drinks according to customer preferences with precise measurements. This model's intuitive touchscreen interface enhances user experience while providing essential analytics for operators to optimize beverage offerings.

In contrast, the EJ1 emphasizes eco-friendliness. This model is crafted with sustainable materials and incorporates advanced energy-saving features, making it suitable for environmentally conscious businesses. The EJ1 also supports a variety of drink options, including non-carbonated beverages, further adding to its versatility.

Lastly, the JT30 takes performance to a new level with its impressive output and flexibility to serve a wide range of beverages. It features a specialized cooling system designed for rapid beverage service without sacrificing quality, making it ideal for high-traffic locations. The JT30’s modular design allows for easy customization, ensuring it can be tailored to meet specific business needs.

In summary, the Cornelius JT20, JS7, J15, EJ1, and JT30 each bring unique advantages to the table, combining modern technology, efficiency, and adaptability to the beverage dispensing market. With a commitment to innovation, Cornelius continues to set the standard in the industry, ensuring that operators can deliver exceptional beverage experiences to their customers.