Setting the Sleep Timer

The unit can be turned off automatically at a specified time.

Hold down REPEAT/MODE/SLEEP * until “SLEEP” flashes in the display.

* or MODE on the remote control

Within 4 seconds, press f or gto specify the time until the power is turned off.

Each time it is pressed, the time changes between 10 and 180 minutes in 10-minute steps.

Specified time

While the sleep timer works, “SLEEP” is displayed.

To check the time remaining until the power is turned off

Repeat step 1 shown above. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Repeat step 1 to display the remaining time and hold down REPEAT/MODE/SLEEP again until “OFF” is displayed.

Simple sleep timer setting

Press REPEAT/MODE/SLEEP while the power is off. The unit is turned on with the last function, and the sleep timer is automatically turned on with the 30-minute setting.

Select the function, if you need, and start playback.

To prevent accidental erasure

Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording.

To record on the tape again

Cover the tab openings with adhesive tape, etc.

Side A

Tab for side A

ENGLISH 11