Remote control
Insert two R6 (size AA) batteries.
R6 (AA)
When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries.
The remote control may not operate correctly when:
-The unit is exposed to intense light, such as direct sunlight
-Objects block the remote control signal to the unit
To use the buttons on the remote control
Buttons on the remote control and the main unit with identical indications have the same functions.
To turn the power on
Press POWER to turn on the display.
When using the unit on the batteries, this button will not turn the power on.
To turn the power off
Press POWER to turn off the display.
To use the FUNCTION button
Each time FUNCTION is pressed while the power is on, the function is selected cyclically.
CD TAPE RADIO
Specifications
Radio section
Frequency range, antenna – FM: 87.5 - 108.0 MHz
Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna
Deck section
Track format – 4 tracks, 2 channels / Frequency range
–Normal tape: 50 - 12,500 Hz (JEITA) / Recording system – AC bias / Erasing system – AC erase / Heads
–Recording/playback head (1), Erasure head (1)
CD player section
Disc – Compact disc / Scanning method –
Laser diode properties – Material: GaAlAs Wavelength: λ = 780 nm Emission duration: Continuous
Laser output: Less than 44.6 ∝W (This output is the value measured at a distance of 200 mm from the objective lens surface on the optical
General
Speaker – 100 mm cone type (2), 36 mm cone type (2)
/Output – Headphones jack (stereo
Power consumption –
Specifications and external appearance are subject to change without notice.
COPYRIGHT
Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used.
FUNCTION
POWER
If an erroneous display or malfunction occurs
Turn off the unit and press POWER 6 STANDBY/ON while pressing s.
If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display.
Leave the unit for a while and turn the power back on.
ENGLISH 5