Cornelius P/N 630900413, P/N 620037008 instruction

IMI CORNELIUS INC g One Cornelius Place g Anoka, MN 55303-6234

Telephone (800) 238-3600	Facsimile (800) 535-4321

INSTALLATION INSTRUCTIONS, BIN STAT KIT, P/N 630000408

These Bin Stat kits apply to all “I” Series Ice makers

Table 1. Loose–Shipped Parts

Item No.	Part No.	Name	Qty.
1	630900413	Spacer, Hex 5/8” Long x 8–32 SS	1
2	70894	Screw MA 08–32 TRPH 24 SS	1
3	51348	Spacer	1
4	630000413	Thermostat Asy	1
5	620037008	Bin Stat Support	1
6	630460064INS	Installation Instruction, Thermostat	1
7	168833002	Washer SR 4W SS E#8	1

1.Disconnect power.

2.Remove front cover of the unit and the electrical box cover plate.

3.Carefully insert the coiled capillary tube through the bottom hole in the electrical box where the elec- trical wires are coming through (see Figure 4).

4.If there is not a hole already in the chassis base, drill a ½” hole in the chassis base as indicated in Figure 3.

5.Straighten approximately 12” of cap tube to go through hole. Re–coil the remainder. Do not disturb coiled end.

6.Insert the “1/4” diameter wire form support into the coiled end of capillary tube and insert the assem- bly through the hole in the chassis base. Route capillary tube to follow support as closely as pos- sible.

7.Remove the 8–32 nut (closest to the ½” DIA hole) that holds the compartment wall to the base. The adapter kits that have a single level, adapter kits P/N’s 02390, 630200153, 08006, 02388, 08004, 630000191 and 08010) require a 7/8” high spacer be used to mount the binstat support. Thread the 8–32 x 5/8” hex spacer on to the compartment stud. Then fasten the thermostat support to the hex spacer using the ¼” high plastic spacer, #8 flat washer and 8–32 x ¾” long phil. head screw. The spacers are not to be used on the elevated adapter kits. Refer to Figure 2.

8.Any excess capillary tubing must be pulled back into the compressor compartment to prevent ice from damaging it during dispenser operation.

9.Seal ½” diameter hole with sealant (RTV).

March 2, 2004

IMI CORNELIUS INC. 20041Rev A

630460064INS

P/N 630000413, P/N 630000408, P/N 630460064, P/N 630900413, P/N 620037008 specifications

Cornelius P/N 620037008, P/N 630900413, P/N 630460064, P/N 630000408, and P/N 630000413 represent a series of innovative components specifically designed for commercial beverage dispensing applications. These specific part numbers indicate specialized attachments and replacement parts that enhance the performance and longevity of beverage dispensing systems while ensuring product consistency and quality.

The Cornelius P/N 620037008 is known for its robust design, ideal for use in high-demand environments. This component focuses on ensuring precise control over beverage flow, crucial for maintaining drinks' carbonization and ensuring customer satisfaction. Its durable materials provide resistance against wear and tear, significantly extending the lifespan of the dispensing mechanism.

P/N 630900413 is engineered with advanced technology to optimize refrigerant flow in beverage dispensing systems. A key feature of this part is its high efficiency, which minimizes energy consumption while ensuring that beverages remain cool and refreshing. This part is also designed to be easily integrated into existing systems, providing an upgrade path without the need for complete system overhauls.

P/N 630460064 offers features aimed at improving the overall user experience. This component enhances the simplicity of sanitation procedures, reducing downtime between product changes. Additionally, its user-friendly design ensures that operators can perform maintenance tasks quickly and efficiently, thus supporting continuous operation in busy settings.

P/N 630000408 and P/N 630000413 are critical in ensuring the optimal mixture and delivery of beverage products, maintaining consistent flavor profiles across different serving conditions. These parts are engineered to accommodate a range of beverage types, from carbonated soft drinks to specialty beverages, making them versatile choices for diverse establishments.

In conclusion, the Cornelius P/N 620037008, P/N 630900413, P/N 630460064, P/N 630000408, and P/N 630000413 represent a suite of components that are essential for maintaining high standards in beverage dispensing. Their main features, advanced technologies, and specific characteristics cater to the unique demands of the beverage industry, ensuring reliable, efficient, and quality service across various applications. These components not only improve operational efficiency but also enhance the customer experience, reaffirming Cornelius's commitment to excellence in beverage solutions.

INSTALLATION INSTRUCTIONS, BIN STAT KIT, P/N 630000408

Item No.

Name

Qty.

P/N 630000413, P/N 630000408, P/N 630460064, P/N 630900413, P/N 620037008 specifications