Cornelius Liquid Base Beverage Dispenser Countertop Hole Location Tubing Access

Page 5

COUNTERTOP HOLE LOCATION (TUBING ACCESS)

1.Using the template provided, layout the location of the access hole.

2.Cut the access hole in the counter. Be sure there are no sharp edges to damage the tubing.

3.Move the Unit into position over the hole and attach the tower to the counter.

4.Route all tubing (concentrate, water, coolant and drain) through the access in the countertop.

MAKING WATER, CONCENTRATE, AND ELECTRICAL CONNECTIONS

Make Water Connections as follows:

CAUTION: If water source exceeds 65 psig a water pressure regulator kit must be used to ensure correct Unit operation. Refer to Installation Kits paragraph for part number.

CAUTION: Do not use a saw to cut tubing, use a tubing cutter or knife to avoid contamination of tubing with particles of material.

CAUTION: Water pipe connections and fixtures directly connected to a potable water supply shall be sized, installed and maintained according to federal, state, and local laws.

1.Check water pressure. If water pressure is greater than 65 psig, install a water pressure regulator. Regu- late the water pressure to 50 psig.

2.Connect tubing marked “Water” to water source, but do not turn-on at this time. Additional tubing may have to be added to the existing water tubing from the dispenser.

3.If additional tubing is used, flush the tubing thoroughly by running four gallons (15 liters) of water to a drain or suitable container.

4.Connect to the tower water tubing.

5.Turn on the water supply and check for leaks.

COOLANT CONNECTION FOR HEAT EXCHANGER

Note: The inlet and outlet fittings on the Heat Exchanger are 1/2I. Use 1/2I tubing from the existing python to the Heat Exchanger. The tubing connections must be leak checked and then insulated to prevent condensation. Tubing, fittings, clamps and insulation to be supplied by the installer.

1.Select best location to tap into existing recirculating cold carbonated water tubing in the soft drink python.

2.The soft drink system must be shut down and all pressure relieved from the carbonator and associated carbonated water tubing.

3.Python insulation must be opened to permit access to the tubing.

4.Find the recirculating cold carbonated water line from the cooling unit.

5.Cut the cold carbonated water line and remove approximately 3I of the tubing to permit the installation of the elbows.

6.Connect tubing as shown in Figure 1.

3

630460001

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Liquid Base Beverage Dispenser Table of Contents Receiving Unit DescriptionDesign Data Concentrate Source Installation InstallationUnpacking and Inspection Location SelectionCoolant Connection for Heat Exchanger Countertop Hole Location Tubing AccessMaking WATER, CONCENTRATE, and Electrical Connections Sealing Unit Base to Countertop USA Connect Concentrate Tubing630460001 MULTI-FLAVOR Tower B Installation Dole Dispensing Valve Adjusting WATER-TO-CONCENTRATE Ratio of Dispensed ProductPreparation for Operation Setting the Portion Control Sanitize the BAG-IN-BOX System AS Follows Sanitizing the BAG-IN-BOX Concentrate SystemsSanitizing the System USA 630460001 Warranty

Liquid Base Beverage Dispenser specifications

The Cornelius Liquid Base Beverage Dispenser is a state-of-the-art solution designed for restaurants, theaters, convenience stores, and other high-demand settings that require an efficient and reliable way to serve beverages. With its sleek design, advanced technology, and user-friendly interface, the Cornelius dispenser meets the needs of both operators and customers.

One of the main features of the Cornelius beverage dispenser is its versatility. It can dispense a wide range of drinks, such as soft drinks, iced teas, lemonades, and flavored waters. This flexibility allows businesses to easily expand their beverage offerings without having to invest in multiple machines. Additionally, users can customize the machine's settings to suit their specific product line, ensuring optimal performance and user satisfaction.

The innovative design of the Cornelius dispenser includes a user-friendly touchscreen interface that simplifies operation. This intuitive display allows staff to easily navigate through options, adjust settings, and monitor inventory levels. The touchscreen can also display promotional messages or nutritional information, providing customers with valuable information as they make their selections.

Another important characteristic of the Cornelius dispenser is its efficient cooling system. The machine incorporates advanced refrigeration technology that ensures beverages are kept at the perfect serving temperature. This not only enhances the taste of the drinks but also improves customer satisfaction. The dispenser's high-capacity cooling system ensures that even during peak service times, drinks are consistently chilled.

The Cornelius Liquid Base Beverage Dispenser is also equipped with smart technology that monitors usage patterns and provides real-time data, allowing operators to make informed decisions about inventory management. This data-driven approach enhances profitability by minimizing waste and ensuring that popular products are always in stock.

Moreover, the dispenser's construction is focused on durability and ease of maintenance. Made from high-quality materials, it is built to withstand the rigors of daily use while maintaining a stylish appearance. Cleaning and servicing the machine is straightforward, minimizing downtime and ensuring that operators can focus on customer service.

In conclusion, the Cornelius Liquid Base Beverage Dispenser stands out in the marketplace due to its combination of versatility, user-friendly technology, efficient cooling, and smart data management. It is an essential investment for any business looking to enhance its beverage service while delighting customers.
Top Page Image Contents