Cornelius ENDURO-175 installation manual Troubleshooting

Page 11

TROUBLESHOOTING

IMPORTANT: Only qualified personnel should service internal components or electrical wiring.

WARNING: If repairs are to be made to a product system, remove quick disconnects from the applicable product tank, then relieve the system pressure before proceeding. If repairs are to be made to the CO2 system, stop dispensing, shut off the CO2 supply, then relieve the

system pressure before proceeding. If repairs are to be made to the refrigeration system, make sure electrical power is disconnected from the unit.

Should your unit fail to operate properly, check that there is power to the unit and that the hopper con- tains ice. If the unit does not dispense, check the following chart under the appropriate symptoms to aid in locating the defect.

Trouble

 

Probable Cause

BLOWN FUSE OR CIRCUIT BREAKER.

A.

Short circuit in wiring.

 

B.

Defective gate solenoid.

 

C.

Defective agitator motor.

 

 

 

GATE DOES NOT OPEN. AGITATOR DOES NOT TURN.

A.No power.

B.Bent depressor plate (does not actuate switch).

C.Defective dispensing switch.

GATE DOES NOT OPEN OR IS SLUGGISH. AGITATOR TURNS.

A.Defective gate solenoid.

B.Excessive pressure against gate slide.

C.Defective Rectifier.

ICE DISPENSES CONTINUOUSLY.

A.

Stuck or bent depressor plate (does not

 

 

release switch).

 

B.

Defective dispensing switch.

 

C.

Improper switch installation.

 

 

 

SLUSHY ICE. WATER IN HOPPER.

A.

Blocked drain.

 

B.

Unit not level.

 

C. Poor ice quality due to water quality or

 

 

icemaker problems.

 

D. Improper use of flaked ice.

 

 

 

BEVERAGES DO NOT DISPENSE.

A.

No 24 volt power to faucets.

 

B.

No CO2 pressure.

BEVERAGES TOO SWEET.

A.

Carbonator not working.

 

B.

No CO2 pressure in carbonator.

 

C.

Faucet brix requires adjusting.

 

 

 

9

620917902INS

Page 10 Page 12
Image 11
Page 10 Page 12
Contents This Document Contains Important Information To the InstallerTable of Contents Description Safety PrecautionsCounter Mounting Installation InstructionsImportant to the Installer LEG OptionICE Diverter KIT Gate Restrictor Plate Mounting Template Drip Tray Drain Assembly Faucets EightCO2 BeverageBeverage Faucets Flow Diagram B Models with EightTroubleshooting Flavor Syrups do not Dispense Beverage not Sweet EnoughBeverages not Cold Units with BUILT-IN Cold PlateWiring Diagram Wiring Schematic Wiring Diagram 220-240VAC Wiring Schematic 220/240V Warranty IMI Cornelius INC

ENDURO-175 specifications

The Cornelius ENDURO-175 is an advanced beverage dispensing technology designed for the demanding environments of the food and beverage industry. Renowned for its reliability and efficiency, this machine has become a cornerstone for establishments aiming to elevate their beverage service while ensuring consistency and quality.

One of the standout features of the ENDURO-175 is its robust construction. Built with high-quality materials, it can withstand the rigors of daily use in busy venues. Its ergonomic design not only enhances usability for operators but also makes it aesthetically pleasing for front-of-house operations. The machine is available in various finishes, allowing it to blend seamlessly into any environment, from casual cafés to upscale restaurants.

The ENDURO-175 is equipped with advanced technologies that distinguish it from its competitors. One of these is its cutting-edge cooling system, which ensures that beverages are served at optimal temperatures, enhancing the overall customer experience. This cooling mechanism is energy-efficient, helping establishments reduce their environmental footprint while keeping costs low.

Another significant characteristic of the ENDURO-175 is its user-friendly interface. The intuitive touchscreen controls simplify operation, making it easy for staff to manage drink selections, monitor inventory levels, and adjust settings as needed. With the ability to connect to a central management system, operators can track usage patterns and inventory in real time, facilitating more effective stock management.

The ENDURO-175 is highly versatile, capable of dispensing a variety of beverages including soft drinks, juices, and even cocktails. This adaptability is crucial for establishments that cater to diverse clientele, enabling them to offer a wide range of drink options without the need for multiple machines.

Moreover, the ENDURO-175 features easy cleaning and maintenance protocols, reducing downtime and allowing staff to maintain hygiene standards effortlessly. Its modular design allows for swift component replacement, ensuring that the machine remains operational and reducing the likelihood of service interruptions.

In summary, the Cornelius ENDURO-175 is a feature-rich beverage dispensing solution, equipped with cutting-edge technology and designed for optimal performance in high-volume settings. Its combination of durability, ease of use, and versatility makes it an ideal choice for beverage service providers looking to enhance their offerings and streamline operations. With the ENDURO-175, businesses can ensure they are delivering the highest quality beverages to their customers while enjoying the benefits of modern technology.
Top Page Image Contents