Cornelius ENDURO-175 installation manual Safety Precautions, Description

Page 3

SAFETY PRECAUTIONS

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates contamination of ice. To ensure continued protection and sanitation, observe the following:

ALWAYS: disconnect power to the dispenser before servicing or cleaning.

NEVER: place hands inside of hopper or gate area without disconnecting power to the dispenser.

Agitator rotation occurs automatically when dispenser is energized!

ALWAYS: be sure the removable lid is properly installed to prevent unauthorized access to the hopper interior and possible contamination of the ice.

ALWAYS: be sure the upper and lower front panels are securely fastened.

ALWAYS: keep area around the dispenser clean of ice cubes.

CAUTION: Dispenser cannot be used with crushed or flaked ice.

Use of bagged ice, which has frozen into large chunks, can void warranty. The dispenser agitator is not designed to be an ice crusher. Use of large

chunks of ice which “jam up” inside the hopper will cause failure of the agitator motor and damage to the hopper. If bagged ice is used, it must be carefully and completely broken into small, cube-sized pieces before filling into the dispenser hopper.

DESCRIPTION

The “ENDURO” series of ice dispensers solves your ice and beverage service needs in a sanitary, space saving, economical way. Designed to be manually filled with ice from any remote ice-making source, these dispensers will dispense cubes (up to 1-1/4 inch in size), cubelets and hard-chipped or cracked ice; and, in addition, several flavors of post-mix beverages. “BC” units include beverage faucets and a cold plate and are designed to be sup- plied direct from syrup tanks and carbonator, with no additional cooling required.

IMPORTANT: For dispensing compressed or extruded style ice, an Ice Diverter Kit must be installed on the dispenser (see Figure 1).

SPECIFICATIONS

Model Descriptions:

ED150 –

B (Beverage Faucets)

 

 

C (Cold Plate)

 

 

Z (No Drip Tray)

 

 

F (Flavor Option)

Ice Storage:

175 lbs

 

Maximum Number of Faucets Available:

8

 

Built-in Cold Plate:

Yes, on BC models only

Electrical:

120/1/60, 3.0

Amps total unit draw

 

220–240/1/50/60, 2.0 Amps total unit draw

Dimensions:

Std unit = 24–1/2 in. Wide X 30–11/16in. Deep X 35–5/8 in.

 

High

 

 

Z–Model = 24–1/2in. Wide X 23–1/16 in. Deep X 35–5/8 in.

 

High

 

1

620917902INS

Page 2 Page 4
Image 3
Page 2 Page 4
Contents This Document Contains Important Information To the InstallerTable of Contents Description Safety PrecautionsCounter Mounting Installation InstructionsImportant to the Installer LEG OptionICE Diverter KIT Gate Restrictor Plate Mounting Template Drip Tray Drain Assembly Faucets EightCO2 BeverageBeverage Faucets Flow Diagram B Models with EightTroubleshooting Flavor Syrups do not Dispense Beverage not Sweet EnoughBeverages not Cold Units with BUILT-IN Cold PlateWiring Diagram Wiring Schematic Wiring Diagram 220-240VAC Wiring Schematic 220/240V Warranty IMI Cornelius INC

ENDURO-175 specifications

The Cornelius ENDURO-175 is an advanced beverage dispensing technology designed for the demanding environments of the food and beverage industry. Renowned for its reliability and efficiency, this machine has become a cornerstone for establishments aiming to elevate their beverage service while ensuring consistency and quality.

One of the standout features of the ENDURO-175 is its robust construction. Built with high-quality materials, it can withstand the rigors of daily use in busy venues. Its ergonomic design not only enhances usability for operators but also makes it aesthetically pleasing for front-of-house operations. The machine is available in various finishes, allowing it to blend seamlessly into any environment, from casual cafés to upscale restaurants.

The ENDURO-175 is equipped with advanced technologies that distinguish it from its competitors. One of these is its cutting-edge cooling system, which ensures that beverages are served at optimal temperatures, enhancing the overall customer experience. This cooling mechanism is energy-efficient, helping establishments reduce their environmental footprint while keeping costs low.

Another significant characteristic of the ENDURO-175 is its user-friendly interface. The intuitive touchscreen controls simplify operation, making it easy for staff to manage drink selections, monitor inventory levels, and adjust settings as needed. With the ability to connect to a central management system, operators can track usage patterns and inventory in real time, facilitating more effective stock management.

The ENDURO-175 is highly versatile, capable of dispensing a variety of beverages including soft drinks, juices, and even cocktails. This adaptability is crucial for establishments that cater to diverse clientele, enabling them to offer a wide range of drink options without the need for multiple machines.

Moreover, the ENDURO-175 features easy cleaning and maintenance protocols, reducing downtime and allowing staff to maintain hygiene standards effortlessly. Its modular design allows for swift component replacement, ensuring that the machine remains operational and reducing the likelihood of service interruptions.

In summary, the Cornelius ENDURO-175 is a feature-rich beverage dispensing solution, equipped with cutting-edge technology and designed for optimal performance in high-volume settings. Its combination of durability, ease of use, and versatility makes it an ideal choice for beverage service providers looking to enhance their offerings and streamline operations. With the ENDURO-175, businesses can ensure they are delivering the highest quality beverages to their customers while enjoying the benefits of modern technology.
Top Page Image Contents