Cornelius PR150 BC manual Drip Tray and Rear Cover Removal

Page 16

C.Wash cup rest with soap solution and rinse with potable water. Install cup rest in drip tray.

D.Clean all exterior surfaces of the dispenser with soap solution and rinse with potable water.

2.CLEANING INTERIOR SURFACES

CAUTION: When pouring liquid into the hopper, do not exceed the rate of 1/2–gallon per minute.

IMPORTANT: Perform the following at least once a month.

A.Lift drip tray to expose the hopper, then then remove all ice from the hopper.

B.The drip tray can be removed from the dispenser by grasping at rear side panels and pulling gently outward.

FIGURE 5. DRIP TRAY AND REAR COVER REMOVAL

C.Remove agitator disk and agitator assembly.

D.Remove tower cover by removing two thumb screws.

E.Move the retaining bail to the rear of the tower which will allow removal of the ice chute assembly.

F.Grasp the auger by the shaft end and lift out the auger tube. Take care not to damage either end of the auger.

G.Remove the auger tube by lifting upward. The tube will seperate into two halves for easy cleaning when fully removed.

H.Open the front door of the cabinet below the hopper. This will give you access to the lower auger drive area and the passage between the hopper and the auger for cleaning.

I.Using the previously prepared detergent solution, clean the valves, the hopper covers, agitator disk, agitator assembly, interior of the hopper, both halves of the ice chute, auger, auger tubes, and the lower auger area of the auger housing. Thoroughly rinse all of the previously cleaned parts with pota- ble water.

13

620918702

Page 15 Page 17
Image 16
Page 15 Page 17
Contents To the Installer This Document Contains Important InformationTable of Contents Drip Tray and Rear Cover Removal Safety Information Recognize Safety InformationThis page Left Blank Intentionally Safety Precautions SpecificationsThis page Left Blank Intentionally Countertop Installation Installation InstructionsInches Mounting Template Flow Diagram This page Left Blank Intentionally Adjustments MaintenanceMonthly Adjusting WATER-TO-SYRUP Ratio Brix of Dispensed Product Auger Assembly Breakdown START-UP and Operating InstructionsCleaning and Sanitizing Instructions Attack the plastic materialDrip Tray and Rear Cover Removal Cleaning Dispensing Valves ICE Auger Speed Control Sanitize B-I-B SystemsWiring Diagram Ladder Diagram This page Left Blank Intentionally Troubleshooting Does not Turn CONT’D Auger TURNS, AgitatorDoes not Beverages DonotIllustrated Parts List Page 108 PR150BC Assembly NamePR150BC Assembly CONT’D Hex Nut, Keps, No 620704604 Fitting, 3/8 By 1/2 MPT Warranty IMI Cornelius INC

PR150 BC specifications

The Cornelius PR150 BC is a state-of-the-art beverage dispensing system designed to meet the demands of commercial beverage service settings. This innovative product caters to various industries, including restaurants, bars, and other hospitality venues, providing an efficient and user-friendly solution for beverage dispensing.

One of the standout features of the Cornelius PR150 BC is its versatile design, allowing it to serve a wide range of beverages. From carbonated soft drinks to beer and iced tea, this system is equipped to handle multiple product types, making it an ideal choice for establishments with diverse beverage offerings. The PR150 BC can accommodate up to 10 different flavors, providing operators with the flexibility to customize their beverage offerings easily.

The technology behind the PR150 BC is an exemplary blend of automation and user interface capabilities. The system incorporates a digital display that streamlines operation, enabling staff to keep track of dispensing levels and product selections effortlessly. Enhanced with intuitive controls, it minimizes the learning curve for employees, ensuring quick adaptation and optimal service speed.

Moreover, the PR150 BC features advanced refrigeration technology, allowing for precise temperature control. This ensures that beverages are dispensed at the perfect temperature, enhancing the overall customer experience. The system is designed with energy efficiency in mind, helping businesses to reduce their operational costs while maintaining high service standards.

The durability of the Cornelius PR150 BC is another significant characteristic that sets it apart. Its robust construction allows it to withstand the rigors of daily use in a busy environment. Additionally, the system is easy to maintain, with removable components that simplify cleaning and upkeep, ensuring long-lasting performance.

Safety is also a critical aspect of the PR150 BC design. It has built-in safety mechanisms that prevent over-dispensing and spills, reducing waste and maintaining a clean service area. The machine is compliant with industry standards, assuring operators of its reliability and safety during use.

In summary, the Cornelius PR150 BC is a sophisticated beverage dispensing solution that combines versatility, advanced technology, durability, and safety. Its ability to dispense a variety of beverages makes it an excellent choice for any commercial operation, promising efficiency and quality in beverage service. With its user-friendly interface and energy-saving features, it stands out as a leader in the beverage dispensing industry.
Top Page Image Contents